I am currently having my 03 Cobra tuned with my new 2.3 Whipple set up. I would like guys with a Whipple to post their HP/TQ figures please. Also their timing. I am running 17#, and just want a comparison. Thanks in advance. :thumbsup:
Whipple numbers?
- Thread starter rsnyder
- Start date
rsnyder said:
My numbers are 607 rwhp/ 593 rwtq with a 3.00 richard racing pulley, 60lbs. injectors kenne bell boost a pump, 18lbs of boost, and 19 degrees of timing with 93 octane!!!
580hp and 511tq with a 3.25 upper at 15 pounds of boost.
I will ask Sutton HP to post my dyno sheet or you can call them at 708-7208500 and talk to Doug for more information.
Mine put 571 HP and 594 TQ
Numbers Are In!
With my old Eaton set up (non-ported with 2.8 upper only), it put down 455/475. That was on a different dyno. On the new dyno, that same Eaton set up put down 412/438:shrug: . After the Whipple, it put down 570/530. That was with 17#boost (3.0 upper),18deg timing (84 degrees/50% humidity), on a VERY conservative tune......
. Go to the kill section and read about my first kill the very next day!
With my old Eaton set up (non-ported with 2.8 upper only), it put down 455/475. That was on a different dyno. On the new dyno, that same Eaton set up put down 412/438:shrug: . After the Whipple, it put down 570/530. That was with 17#boost (3.0 upper),18deg timing (84 degrees/50% humidity), on a VERY conservative tune......
. Go to the kill section and read about my first kill the very next day!
I wish it would have been cooler when I went dyno but it was 101 with 90% humidity. Have fun
Users who are viewing this thread
