Whp?

[svts197jag]

Whats up guys I have an 07 GT500 with a 13-14 tvs 2.4 pulley, 08 crank pulley, twin 65mm TB, 13/14 injectors, no BAP, BPS oversize elbow, off road x-pipe JLT123mm CAI ,vmp tripple pass H/E with 170 thermosta. Email tune sct from VMP by BJ 93 and 100 octane tune. What king whp my car should be making to the wheels on 93 and 100 tune?

Sent from my [device_name] using the svtperformance.com mobile app

 

[StrayBullitt]

I'm getting ready to install nearly the same setup but with a vmp gen II. Did BJ say it was safe to run that 2.4 upper without a BAP ? I have been holding up progress awaiting a BAP. But You should be well into mid and if not upper 600's on the 100 Octane.

 

[svts197jag]

I'm getting ready to install nearly the same setup but with a vmp gen II. Did BJ say it was safe to run that 2.4 upper without a BAP ? I have been holding up progress awaiting a BAP. But You should be well into mid and if not upper 600's on the 100 Octane.

He did not said i just send him my MODs list he send me a tune and car runs really good with no pro blems.

Sent from my [device_name] using the svtperformance.com mobile app

 

[StrayBullitt]

Got ya, killer.. it will be interesting to see what you put down.

 

[RedVenom48]

Id estimate 630 rwhp. 650-660 on 100 depending how aggressively BJ tuned your car. For safety, Id rec a BAP sooner rather than later!

 

[sleek98]

I would think 630-640 on 93 and 660-675 on 100 depending on timing.

 

[Pribilof]

I got 686hp / 669 tq, corrected, with similar mods plus a BAP, on 100 octane.

 

[Jam421]

I'm guessing 640-650rw on 93 octane at 16-17 psi boost?

 

[RedZR]

My 2008 has the same blower and intake system and did 621 before I added the ford racing dual throttle body. That TVS really makes the 5.4 a torque monster


Sent from my iPhone using svtperformance.com

 

[cgaulzetti]

I just got my car back. It's a 2008 that has big injectors, a jlt cai, a BAP, but we opted to run the stock pulley and keep boost around 15.5. I've got an nGAUGE too so I can keep an eye on things. We only have shitty 91 gas here but on a Mustang Dyno we went from 375 to 505hp at the wheels and 395 to 504 foot pounds of torque. The estimated crank power went from 442 to 595.