Wich wheel studs?

[Anabolic]

I stripped a stud on my car today,

I would like to buy extended wheel studs from ARP
Does anyone have a link/price for a set by chance?

 

[SVT_Troy]

I stripped a stud on my car today,

I would like to buy extended wheel studs from ARP
Does anyone have a link/price for a set by chance?

If you dont want to drill the hubs you need to go with ARP# 100-7723 which are about $65 for 5.....

If you dont mind drilling your hubs you can use ARP #100-7703 which are alot cheaper
(note some people just press the 7703's in without drilling the hole but the Knurl is smaller than the oem stud size which is why you will hear people saying that the hub must be drilled out)

Stock stud. 0.594"
ARP 100-7723 0.615"
Moroso 46180 0.615"
ARP 100-7703 0.625"

 

[Anabolic]

oh i see, so I could, but not should do the washers/drive studs through with impact like normal? lol

 

[xsboosted]

You can freeze them overnight and lightly tap them in the next day. Worked for me, I didn't wanna risk stripping them out with a nut and washers!

 

[ripnesscobra]

100-7723s here. You don't need to drill the hub to install and they have shoulders for the rotors to align on like the stock studs do. The other ones do not.

 

[Anabolic]

100-7723s here. You don't need to drill the hub to install and they have shoulders for the rotors to align on like the stock studs do. The other ones do not.

so just push them in and drive through no problems? how're they holding up