This would be a lot of stuff to ship, so I would prefer to sell locally...
I am selling a complete supercharger & aftercooler kit for a 1999 Mustang Cobra. This will work on other models, but you will need to buy a new blower bracket from vortech. On a conservative tune with 9lbs of boost, my Cobra put down 430rwhp. Everything is still on the car, but it would only take me a day to remove everything. I would recommend having the oil seals redone on the blower since it is a few years old (last time I checked it was just over $100). The only other thing you would need is to relocate your battery to the trunk (so you can put the coolant tank in front)and you will have 500+bhp. Here is what is included:
Vortech SQ2 blower
3.12 pulley
Vortech Aftercooler (with coolant tank)
42 lb injectors
SCT programmed chip (tune for 9lbs of boost by Tru Dyno Sports)
Lightning Intercooler pump
Lightning MAF
Cold Air Filter set up w/ new cone filter
All piping & connectors
All hose clamps w/ T clamps
Gords Heat Exchanger w/dual fans (major upgrade from vortech heat exchanger)
Stock oil pan tapped for oil feed
Kenne Bell Boost-A-Pump 20A
All this stuff ran me $6K+, but my loss is your gain. $3300 OBO
I am selling a complete supercharger & aftercooler kit for a 1999 Mustang Cobra. This will work on other models, but you will need to buy a new blower bracket from vortech. On a conservative tune with 9lbs of boost, my Cobra put down 430rwhp. Everything is still on the car, but it would only take me a day to remove everything. I would recommend having the oil seals redone on the blower since it is a few years old (last time I checked it was just over $100). The only other thing you would need is to relocate your battery to the trunk (so you can put the coolant tank in front)and you will have 500+bhp. Here is what is included:
Vortech SQ2 blower
3.12 pulley
Vortech Aftercooler (with coolant tank)
42 lb injectors
SCT programmed chip (tune for 9lbs of boost by Tru Dyno Sports)
Lightning Intercooler pump
Lightning MAF
Cold Air Filter set up w/ new cone filter
All piping & connectors
All hose clamps w/ T clamps
Gords Heat Exchanger w/dual fans (major upgrade from vortech heat exchanger)
Stock oil pan tapped for oil feed
Kenne Bell Boost-A-Pump 20A
All this stuff ran me $6K+, but my loss is your gain. $3300 OBO
