Swapping a FR500C 5.0L into my Mach1, need an extra wiring harness to prewire the new motor with.
Engine harness: Fuel/Charge harness Connects to calibration harness under the hood near antenna. Runs 7 of the injectors, all COP's, alternator, TP sensor, IAC, coolant temp sensor, camshaft position sensor, and all connections on intake.
Thanks.
Engine harness: Fuel/Charge harness Connects to calibration harness under the hood near antenna. Runs 7 of the injectors, all COP's, alternator, TP sensor, IAC, coolant temp sensor, camshaft position sensor, and all connections on intake.
Thanks.
Last edited: