Looking for stock unmolested blowers. Please state milage, year and condition etc. My inventory is getting thin. Have business address for shipping. Shipping zip is 67010
Thanks SVT!
Thanks SVT!
WTB OEM blowers
- Thread starter crownaviation
- Start date
I have one off a 2003 Cobra 4.6L DOHC that was taken off at 914 miles. As new from Ford Factory. Don't know if your looking for just 5.4/5.8 or not.
Ahh.. yeah I need the 07-12 stuff. Thanks
I've got a elbow un-ported from a 12 model 8000 miles for 40 bucks shipped if you are interested I know your wanting the blowers just thought I would throw it out there
I just did the Tvs swap, so I have a 08 stock blower and elbow with steeda pulley, has 26k miles for $400 nothing wrong with I just upgraded. Also have stock pulley to go with it.
Or I would take a 65mm TB or Barton shifter in trade for my 08.
Or I would take a 65mm TB or Barton shifter in trade for my 08.
Last edited:
I have a take-off from my 2009 GT500. Never pullied or ported. Great cosmetic condition. 14,500 miles.
i have a couple of 08 blowers 1 with 2k miles and the other 1 with 6k miles
and i am in KS...
and i am in KS...
What are you paying for for these. I have a 2011 with 1500 miles
Crown, I have a 2012 with 1800miles on it, with elbow.
Picture of it is up on the DOB Forum
Picture of it is up on the DOB Forum
I have a stock unit from an 08 GT500
900 Miles on it
Perfect cosmetic condition
900 Miles on it
Perfect cosmetic condition
Have a pile of elbows but thanks
I normally only go $350 shipped with elbow
$350 shipped to the business address is all I pay for them.
I do $400 shipped to the business in that case but is the absolute max.
Will pm ya
11 and 12 I go $400 shipped low miles. The older (usually sit and the snout seals go bad) I had to replace a few of them so far. PITA and cost me about $70 to replace plus all the time involved
Only need the blower and elbow. Will give you $400 shipped to my business address for the 2012
Pics to: [email protected]
Need to see rotors. thanks
Also, if you ship without a special blower box made to ship them I have specific instructions so they are not damaged in shipping.
Purchased 3 so that brings my inventory to 5. Would like about 2 or 3 more right now.
Thanks SVT
Need to see rotors. thanks
Also, if you ship without a special blower box made to ship them I have specific instructions so they are not damaged in shipping.
Purchased 3 so that brings my inventory to 5. Would like about 2 or 3 more right now.
Thanks SVT
07 no port, 2.6 pulley about 10,000 miles... no elbow. Pics sent to email
Did not get pics.,.
Sent again to [email protected]..... titled oem blower pics
'12 m122 take off, comes with stock elbow, and stock and 2.59" pulleys (currently mounted) (if you want them). Perfect cosmetically, untouched, non ported. Car has 20k on the odometer. Also have 2 - twin 60 MM Tb's. Pics sent in 3 emails to the address above.
Last edited:
Pm's sent I think.. essentially this is what I can pay to control cost on my kits.
shipping is to business address in KS. 67010. If you have a real blower box for shipping I will throw in an additional $20 if you ship it in the blower box (running low on those too)
$350 shipped for 07-09
$400 shipped for 10-12
Must have elbow and bypass valve. Must be in good condition. Have a couple deals working now for a couple more right now will let everyone know
Thanks again guys
shipping is to business address in KS. 67010. If you have a real blower box for shipping I will throw in an additional $20 if you ship it in the blower box (running low on those too)
$350 shipped for 07-09
$400 shipped for 10-12
Must have elbow and bypass valve. Must be in good condition. Have a couple deals working now for a couple more right now will let everyone know
Thanks again guys
What kits do u sell? I've seen Gt500 blower on 4valve cobra's but do u make kits for Gt500 blowers on 2valve's?
The department of boost (dob) kit for the 4.6l 3v
Users who are viewing this thread
