I am bored with my car so I am going to try to move onto something else. I bought it 3 1/2 years ago with 9,300 miles on it and now it has right at 14,000 miles on it. The interior has red leather seats and the carpet/interior panels are black. It has the IUP package with my color dash. The body is in excellent condition, the only problems it has is the clutch is pretty much gone and it needs a tune. It has cold start issues but once it is warmed up it is fine. It has a set of wheel replica black chrome fr500's with Nitto 555's up front and Nitto 555r's in the rear. If someone is intererested, I will get whatever pics they are interested in seeing. I would like to trade for a clean fox that is built but still streetable.
Located in Quincy, IL
Engine
Paxton 2200
GT500 fuel pumps
FRPP 39 lb injectors
Autolite HTO's
JPC intake
FRPP delete plates
JPC Fuel Rails
IAT sensor relocated to intake
Custom made "paxton" reservoir
K&N breathers
Kooks headers with off road x
Stage 8 locking bolts
Magnaflow cat back
Trans and clutch
MGW shifter
Brakes
Baer Decelarotors
Hawk HPS pads
Steeda braided hoses
Driveline
Dynotech 3.5 driveshaft
Eaton Posi
Moser axles with extended studs
FRPP 4.10's
Suspension
BMR radiator support
BMR k-member
BMR adjustable a-arms
BMR camber bolts
Tokiko adjustable D-specs
BMR billet lower control arms
BMR adjustable upper control arm
BMR upper control arm mount
BMR adjustable panhard bar
BMR Extreme anti roll bar
Cobra jet springs in rear
Steeda HD strut mounts
Miscellaneous
Holeshot wheels
SLP linelock
SOS dual guage pod
Autometer wideband
Autometer boost guage
Parts to be installed
Paxton 8 rib pulleys
IW 10% overdrive pulley
Thumprr tensioner
Dual durometer bushing for axle housing
LPW rear end cover
Located in Quincy, IL
Engine
Paxton 2200
GT500 fuel pumps
FRPP 39 lb injectors
Autolite HTO's
JPC intake
FRPP delete plates
JPC Fuel Rails
IAT sensor relocated to intake
Custom made "paxton" reservoir
K&N breathers
Kooks headers with off road x
Stage 8 locking bolts
Magnaflow cat back
Trans and clutch
MGW shifter
Brakes
Baer Decelarotors
Hawk HPS pads
Steeda braided hoses
Driveline
Dynotech 3.5 driveshaft
Eaton Posi
Moser axles with extended studs
FRPP 4.10's
Suspension
BMR radiator support
BMR k-member
BMR adjustable a-arms
BMR camber bolts
Tokiko adjustable D-specs
BMR billet lower control arms
BMR adjustable upper control arm
BMR upper control arm mount
BMR adjustable panhard bar
BMR Extreme anti roll bar
Cobra jet springs in rear
Steeda HD strut mounts
Miscellaneous
Holeshot wheels
SLP linelock
SOS dual guage pod
Autometer wideband
Autometer boost guage
Parts to be installed
Paxton 8 rib pulleys
IW 10% overdrive pulley
Thumprr tensioner
Dual durometer bushing for axle housing
LPW rear end cover