Is anyone really familiar with the zex nmu/tps box? I have everything mounted and wired. I've had the kit working in the past but today it's giving me fits. I unhooked everything to clean up the installed. Today I turned the system on and checked the WOT operation and make sure the box was still programmed correctly. I hooked up the bottle and hit the peddle (with the nozzle unhooked of course) and it fired for a second and quit? I didn't have the fuel line hooked up. Do I need to hook the fuel line up? Before the noids would click any time the peddle was on the floor (no fuel or n2o hooked up) but not it will only click one time and stop. I have to cycle power to the box to get it to click again. I have the tps resistor wire on the brown "falling" voltage tb wire. If I arm the system with the key OFF the noids click rite away
Anyone familiar with these POS ? I'm about to crack it open and wire direct to the coils and just run a micro under the peddle w/ my window switch!
Anyone familiar with these POS ? I'm about to crack it open and wire direct to the coils and just run a micro under the peddle w/ my window switch!