I'm hoping Hendo responds back and says his wheels don't rub because that's the offset and width I'm looking to run lol
Thanks bro, I'm seriously trying to find out if 19x10.5 wheels with +45 offset and 295/35/19 rub in the rear. It's hard to tell by calculations
I used this site Wheel Offset Calculator when I was building my wheels.
It allows you to put in your current wheel specs and add the wheels your thinking about and it will tell you how different the fit will be.
I think my stock 2011 5.0 wheels were 18x8 +44, so if you add 19x10.5 and +45, then the wheels will sit 31mm out more than stock and 33mm more towards the inside.
25.4mm = 1inch
So the 10.5 @ +45 wheels will be 1.22" out more towards the outside than stock wheels.
Hope this helps.
Wheels: RTR in Matte Black
Size: 19 x 9.5
Offset: +33 I believe
Tires: Falken F452s 255 fronts and 275 rears
Suspension: Steeda Ultralites, Koni STR.T, GT500 strut mounts, BMR Adj PHB
LC818s 19x8.5 and 19x10
Boss laguna seca wheels. 19x9 19x10
255/40/19 and 285/35/19.
Sportline springs.
The black car has my old factory brembo wheels with 285/35/19s in the back.
20x9 / 20x10.5 iForged 3 peice wheels
Matte black face with Gloss black lips
255-35-20 / 305-30-20 Toyo TR-1 tires
Koni Cortex Racing Coil-Overs
15" StopTech 6 Piston Brakes
[/IMG]
Wow this is a great setup.
Is it ok to use 6 pistons at front with the small 2 at the rear, won't that upset the torque ratio?
any more pics of these 2 cars? what springs does the black one have?
what size tires?
Here are some pictures of my car from the photoshoot with cbrtrx.
Yeah i took the pics right after doing the suspension. By the time I finished it was getting dark. Threw them on the Wrong sides, doh. It was fixed 2 days after. Thanks for the heads up.
True Forged Chicanes
255/35 and 315/35
Dropped on FRPP springs
Those lower fog lights bulbs... I MUST HAVE THEM... Info please? :rockon: