Official: 2011+ Mustangs Wheel and Tire thread

saunupe1911

Member
Established Member
Joined
Apr 25, 2012
Messages
201
Location
DFW, TX
I'm hoping Hendo responds back and says his wheels don't rub because that's the offset and width I'm looking to run lol
 

Stangman@SM

UBENB10
Established Member
Joined
Jul 17, 2008
Messages
218
Location
Sacramento-Mustang
Thanks bro, I'm seriously trying to find out if 19x10.5 wheels with +45 offset and 295/35/19 rub in the rear. It's hard to tell by calculations


I used this site Wheel Offset Calculator when I was building my wheels.

It allows you to put in your current wheel specs and add the wheels your thinking about and it will tell you how different the fit will be.

I think my stock 2011 5.0 wheels were 18x8 +44, so if you add 19x10.5 and +45, then the wheels will sit 31mm out more than stock and 33mm more towards the inside.

25.4mm = 1inch

So the 10.5 @ +45 wheels will be 1.22" out more towards the outside than stock wheels.

Hope this helps.
 
Last edited:

saunupe1911

Member
Established Member
Joined
Apr 25, 2012
Messages
201
Location
DFW, TX
I used this site Wheel Offset Calculator when I was building my wheels.

It allows you to put in your current wheel specs and add the wheels your thinking about and it will tell you how different the fit will be.

I think my stock 2011 5.0 wheels were 18x8 +44, so if you add 19x10.5 and +45, then the wheels will sit 31mm out more than stock and 33mm more towards the inside.

25.4mm = 1inch

So the 10.5 @ +45 wheels will be 1.22" out more towards the outside than stock wheels.

Hope this helps.

Those was my stock wheels as well and those were the measurements that I got too. It seems that it will be a tight fit, but I was wanting to hear from someone that's actually running the setup to be sure. I wish our cars were about an .5 inch wider
 

Nick Nasty

New Member
Established Member
Joined
Sep 11, 2010
Messages
234
Location
Jacksonville, FL / Ft. Drum NY
Wheels: RTR in Matte Black
Size: 19 x 9.5
Offset: +33 I believe
Tires: Falken F452s 255 fronts and 275 rears
Suspension: Steeda Ultralites, Koni STR.T, GT500 strut mounts, BMR Adj PHB

IMG_2582.jpg

IMG_2583.jpg

IMG_2587.jpg

IMG_2588.jpg

IMG_2593.jpg


tires are backwards...
 

NASCAR5.0

New Member
Established Member
Joined
Aug 3, 2011
Messages
128
Location
USA
Boss laguna seca wheels. 19x9 19x10
255/40/19 and 285/35/19.
Sportline springs.

The black car has my old factory brembo wheels with 285/35/19s in the back.

IMG_9018.jpg

any more pics of these 2 cars? what springs does the black one have?
 

5.0GT

Member
Established Member
Joined
Jan 12, 2012
Messages
673
Location
Qatar
Wow this is a great setup.
Is it ok to use 6 pistons at front with the small 2 at the rear, won't that upset the torque ratio?

20x9 / 20x10.5 iForged 3 peice wheels
Matte black face with Gloss black lips
255-35-20 / 305-30-20 Toyo TR-1 tires
Koni Cortex Racing Coil-Overs
15" StopTech 6 Piston Brakes

6918753113_5e55632f9e_b.jpg

[/IMG]
 
Last edited:

cbrtrx

Member
Established Member
Joined
Nov 27, 2003
Messages
622
Location
tampa fl
any more pics of these 2 cars? what springs does the black one have?

The black car has the Eibach pro kit from a 2008 gt. My car has sportlines, its hard to tell in the pics but my car sits just a little bit lower in the front then his but atleast a 1/2 inch lower in the back.
 

2012GTCS

Active Member
Established Member
Joined
Jan 14, 2012
Messages
1,115
Location
Long Island
Yeah i took the pics right after doing the suspension. By the time I finished it was getting dark. Threw them on the Wrong sides, doh. It was fixed 2 days after. Thanks for the heads up.
 

AC 5.0

New Member
Established Member
Joined
Dec 26, 2011
Messages
71
Location
Houston, Tx
Yeah i took the pics right after doing the suspension. By the time I finished it was getting dark. Threw them on the Wrong sides, doh. It was fixed 2 days after. Thanks for the heads up.

Do you have any more pics? Possibly a more side-on view?

Car looks awesome!
 

Users who are viewing this thread



Top