Search results

Hey guys, I have the stock catback off of my 2001 Cobra Convertible just sitting in my parents garage. I need to get rid of it as I've been out of the Mustang game for a couple of years now. The car had 50,000 miles when the exhaust came off and it's in decent shape (no rust or anything). It's...

Came off the car long before the accident, about 2000 miles (est.) on tires. Looking for around 500 bucks. No curb rash. In the above picture, the inner lip appears to be curbed all the way around. The parking brake cable end came loose from it's clip on...

So the day started out fine (St. Patty's). I go to work, make some money. Leave work about 9:00pm, arriving home around 9:15. 1:30am - We hear a loud pop from inside my apartment that resembled a gunshot 1:45ish - Another loud pop. 2:15am - We hear what sounds like a garbage truck...

Ok guys, I have a new car on order and I need to get rid of this thing! If you are looking for a nice Oxford White Pullied Terminator at a good price, or if you know somebody that is, PM me. PRICE LOWERED!!! $16,500! -Item: 2003 Ford Mustang Cobra -Miles: 77,xxx -Location: South Orange...

Ok, so one of my pullies decided to rip open and tear my belt off! I'm looking to order a replacement but I'm not sure of the stock size. It's location is just to the right of the crank pulley. I saw a previous post in here with regards to the billetflow 4-piece idlers in which the location...

Looking for stock H-pipe in order to pass smog. Hoping for local, I'm in South Orange County!

Hey boys I'm selling my intake, it's got less than 100 miles on it. I put it on, drove to see Greg@RET, drove home, and it's on my car in the driveway. I payed $299 + shipping ($309 shipped) from lethal performance. I'm asking $280 shipped or $275 + shipping. All parts, instructions and JLT box...

So I already installed my Dual beam Xenon headlights last night but after looking through the instructions (or lack there of) from americanmuscle.com, I wanted to get some suggestions on where to tap for power and ground with this kit... any ideas?

---NO LONGER FOR SALE--- 2003 Ford Mustang Cobra Coupe Oxford White / Black w/ Silver Alcantara Suede Inserts 70854 miles Tastefully modded! *H&R Race Springs *Maximum Motorsports Full Length Welded Subframe Connectors *1/4" Rear Wheel Spacers *Smoked Tail Lights...

Hey guys, I'm thinking of doing Bassani Mid-Lengths on my '03 Cobra, but I live in Cali, so whatever I do has to be street/smog legal. Any inputs?

Well, after a year and a half of owning it, for her 70k mile bday, I gave my termi a 2.8 pulley and a custom dyno tune by greg at RET! I must say it's more than I ever thought it would have been! The baseline run was 395rwhp and 367rwtq SAE, and when I drove it home she was making 450rwhp and...

well, after a year and a half of owning it, for her 70k mile bday, I gave my termi a 2.8 pulley and a custom dyno tune by greg at RET! I must say it's more than I ever thought it would have been! The baseline run was 395rwhp and 367rwtq SAE, and when I drove it home she was making 450rwhp and...

I've got a problem guys, I've got an appointment to finally get my car pullied at RET, and Greg doesn't have the pullies in stock! So here's the deal, I need to find a place whether it be online or in person that I can get a billetflow upper and 100mm idler pulley shipped over night! My...

----SOLD---- This car is at Audi Mission Viejo and the specs are as follows: Phantom Black Pearl Effect Black Interior Technology Package Navigation Stainless Inlays Bang & Olufsen Sound System $59,015 ----SOLD----

Pics are being resized and edited as I type this! here are a few specs... Daytona Gray Pearl Effect over Black Interior Carbon Sigma Sideblade I even got a couple videos so you can hear how quiet the thing is at idle EDIT: pictures below

I put these on about a week ago and let them settle first before taking the pics today.... all of the front isos were removed, and only the bottom isos were removed from the rear springs, and there is also a 1/4" spacer in the rear in preparation for the 10.5"s... tell me what you think!

anybody know of a good place in south county to have my H&Rs installed? GRC wants like 300+ to do them and I think that's a ****in joke for springs

Anyone else going? I just signed up!

Pics taken in the Saddleback Church parking lot if anyone is familiar with the area... oh and before anyone says it, I know it needs H&Rs and 10.5" rears

So my hood insulator looks like crap, no surprise there, the car has 65k miles. So I go to remove the hood and i find what looks like a ground strap attached to the fender which was also attached to the hood blanket???? It left me baffled seeing as so many people remove the hood blankets, is...

looking for a stock shifter for my 03 cobra's T56... PM me if you've got one

http://videos.streetfire.net/category/Ford/2/c81a4b6d-8d50-438b-afd6-986600217b9e.htm Brutal honesty at it's finest... too bad its all true!

Hey guys, I remember seeing an emblem replacing the Ford emblem on the decklid, but instead of saying Ford, it read Fast and it was done in carbon fiber. Anyone know where I can get my hands on one?

with chrome saleen wheels, i'm looking to do those in the next few months after i get coilovers on it and i'm curious to see how this would look, i've only seen them on black and silver cars, never on white so toss up some pictures if you've got em!

I'm looking at lowering my car ~1.5 inches all around, so far the only suspension/chassis parts i have are MM FLSFCs. I love my ride quality stock with the subframes so i want to keep as much of that as I can. So my question would be, how is the ride quality (softness, dampening) different...