after 11 months of procrastinating, and finding time, i wound up having to replace the crankshaft, bearings, oil pumps, did a few upgrades along the way, remote oil mount and cooler. This was after i primed the motor, its making about 65psi on cold oil, there is no coolant in the motor as per...
after many months of being screwed by Speedtek, and JLP performance on tunes, TrueStreet Performance in Mckinney finally came through and got me in.
this is n/a boost motor, F-42 cams, ported heads and bullitt intake, Ferrea OS valves, +.030 bore, 3200 stall converter, 2 piece drive line...
Startup Tune Video by Fast150 | Photobucket
still needs a better tune, but likely going with another tuner, being that he wont work with me and wants me to buy another Maf after he was wrong about which one to use the first time around...
got rid of the chain slap, replaced the chain trickflow tensioners <- junk. now it sounds like a lash adjuster or two is not priming up after 10 minutes at idle
video-2012-10-30-19-11-50.mp4 video by Fast150 - Photobucket
i bought this as a spare a few years ago, never used it has been sitting wrapped up on a pallet. it has Red eagle clutches, Kolleen steel plates, kevlar bands, and a transgo shift kit. i paid $700 for it but i will let it go for $500.
its like this one only painted black instead of silver.
im going turbo so im selling my current setup to make room.
P1SC Head unit 30,000 miles no leaks
modified bracket with added idler to prevent belt slip
2.5" piping with silicone couplers and T bolt clamps.
Godspeed 44mm BOV
Godspeed large FMIC good for 700hp
ProTube blow thru maf...
any of you who had ever traveled or been to little river academy dragway would have met this man. He ran the track for 40+ years. a few days ago he was having heart surgery to have a stint put in, and had a blood clot make it to the brain and caused him to have a stroke, so the doctors put him...
never let your friends load your magazines for your Kimber 1911 UC
they might manage to fit a .40cal in the bottom of the magazine.
I was lucky i bought a quality weapon that did not come apart in my hands when the round came out. the extracting paw and barrel look fine, no damage, i was very...
Photo: #OccupyOakland General Strike Protesters Burning an American Flag [Update: Photo of Rioters Burning Another U.S. Flag!]
i just saw this on the local news here and googled to find pictures of such crimes
specs:
brand new open box.
Windows vista business
Intel Xenon Quad-Core E5410 2.33ghz processor. (dual CPU board)
comes with 2gb of FBDDR2 upgradable to 16gb
160gb SATA2 HDD.
HP Light-Scribe DVD-RW
$450 shipped
i bought this and never used it. these go for easily 700-800 bucks
HP...
a month ago i purchased 15 of these with the hopes of a 40K hour life, and 7 w of power consumption with a higher lumens output, but after the first 10 were dead after a less than 5 hours on most of them, 2 died after just 2 hours, and 2 were partially DOA, but after the first 10 died before the...
weathered 4.6 iron block .030 overbore
Manley forged H-beam rods ARP2K fasteners
Ross forged pistons
stainless Total seal rings
Speed-pro rod and main bearings
ported stock heads to match intake and cams going in.
wet flow is 227cfm intake 197cfm exhaust on a 1.78" valve and a 1.45" valve
it seems that my sticker being placed legally above the rear view mirror so that it does not obstruct the clear view of the driver as per Texas law, is not visible enough for the towing service at my apartment complex so i used their sticker to direct their eyes to my sticker.