He is my newest project. A 05 Ford Gt, Going to have a killer motor capable of 8500rpms. Bryant billet crank, manley rods, diamond pistons, fox lake cnc'd heads, custom cams, Stainless Works 1 7/8/ to 2'' step headers custom by stainless designed by Me. Mcloed twin disk clutch, Some trans treatments like 300m shafts, cryod and micronited, 360 forged Straight five carbon wheels 21*13 rear and 20*9 fronts wrapped in blue carbon kevlar. Tires will be 355-25-21 rear and 275-35-20 fronts. Traction control that i have been working on. Ceramic Composite Rotors and brakes off the new zr1 which will drop 46lbs in rotating mass. Car will be painted Vista Blue with Tungstun stripes like my shelby. I used the factory blower and put a 1'' titanuim Shaft through it and then sealed of the area where the rotors were and then i am having Beck Mechanical turn that section into the intake with a sheetmetal elbow and a 90mm t.b on the pass side of the motor. The car is goin to Run on e85 also. Hope to have it done for texas mile in Oct.
Later Dan
www.thefordgt.com
Later Dan
www.thefordgt.com
Last edited: