2013 kenne bell 2.8lc install - boostapump

[Freednut]

The directions that came with the kennebell kit are a little off; they say there's a red and white wire off the drivers side pump. Can some one clarify which wires go to what on a 2013 shelby? Also can some one tell the best place to sell the stock TVs blower?

thanks!

 

[GT500662]

Can't help with the wiring issues...I'd try the 2012 and below Shelby forums, as there is a lot of those guys wanting to upgrade to the 2.3 TVS

 

[07 Black Beauty]

Yep throw it on the market place here.

 

[Snoopy49]

From the 2014 Mustang Service Manual

 

[Van@RevanRacing]

The directions that came with the kennebell kit are a little off; they say there's a red and white wire off the drivers side pump. Can some one clarify which wires go to what on a 2013 shelby? Also can some one tell the best place to sell the stock TVs blower?

thanks!

the FPDM wires are violet/green for 2011-2014 GT500's

you also need to replace two fuses in the engine bay fuse box. F13/F14 are 20 AMP and need to be increased to 30 AMP

Van

 

[Snoopy49]

Van,
Will the wire support a 30 amp load?

 

[Snoopy49]

Van,
It looks like the wires are 10 gauge, so there shouldn't be a problem.
Refer to connector C265 pins 6 & 7.

 

[TORQJNKY]

Here you go. Disregard the red dots on pic two.

 

[Naptime]

the Kenne Bell kit has great instructions but you would think that for the price of the kit they would update the install instructions to reflect the differences between the '07 and '13 year model cars.

Just sayin'

 

[Devious_Snake]

you definitely need the 30 amp fuses, thats something they don't tell you. My car blew one of the 20 am fuses and it wouldn't start.