New PB !!!!!!

[Robertt305]

Well at least your reaction time was faster than your 60' on that second slip....lol Nice job man!

Yea there was a young guy in a new ZO6 that I didn't want loosing it driving on street tires, so I let him take the jump. Needless to say I caught up to him lol

Congrats!!! thats awesome.

What's the set up?

KB 2.8 @ 18 psi, full exhaust, spec clutch, 410 gears, slicks and skinnies, WOT with 2 step @ 2500 rpm launch

Yes, very nice. I love the nights when the slips just keep getting lower and lower. Congrats Robert!

Yea I was gonna make another pass but I said screw it and went home on a good note...

 

[Robertt305]

Congrats! Glad the car is holding together.

No video? You know Tracy is gonna call BS and say you picked the slip up off the ground! rofl

Haha can't get me there !!

I raced the white Gt500 that was on the dyno at the shop, so there was a witness lol

I only have a video of the 10.7 run and let me tell you, 6 foot flames were coming out of every shift

 

[white88lx]

So just wondering if got this straight!! your launching off the 2 step @ only 2500 rpm?

Is the car bogging badly or do you have it set that low cause anything higher just means the tires spin?

 

[CPRsm]

^^^ higher means things go Kaboom lol

 

[Robertt305]

Pulled a tire at 2500 so I'd say it's set perfect and nothing went kaboom


1.61 60 foot means no bog

 

[Dave London]

Congrats .....

 

[Robertt305]

MPH is strong Rob! Nice driving!

That's a hell of a compliment coming from the shifter king!!

Thanks

 

[Blazeone]

Congrats on the great runs, what fuel are you using?

 

[Robertt305]

A ton of timing and a ton of Torco on pump gas

Lmao

It's a Lund tune

 

[Blazeone]

A ton of timing and a ton of Torco on pump gas

Lmao

It's a Lund tune

Jon does my tunes also, the race tune I use is for C16 and has 24.5 degrees of total timing. What is your total timing? Thanks , Tom

 

[Robertt305]

Jon does my tunes also, the race tune I use is for C16 and has 24.5 degrees of total timing. What is your total timing? Thanks , Tom

Top secret

 

[Blackmax]

I believe you have 410" and I have 373's yet you have a higher m.p.h. But I'm at redline with 28 inch tires crossing the traps what rpm are you doing?

 

[Robertt305]

I believe you have 410" and I have 373's yet you have a higher m.p.h. But I'm at redline with 28 inch tires crossing the traps what rpm are you doing?

Yes I'm running 410's with a 28 inch tire as well crossing around
6600-6700 rpm

Don't fear the gear

 

[Blackmax]

Well if you are crossing at that rpm either you have a built motor or bigger kahuna's than me. Congrats on the 10.5 I hope to get that time near the end of this month with the cooler temps. I ran the 10.70 in 90 degree weather.

This winter I'm doing nitrous mostly because I think its so cool to purge at the line and hope to get my 9.99.

 

[Nathan'sTsi]

He is stock motor. I just thinly he iss too worried about replacing it.

 

[Robertt305]

He is stock motor. I just thinly he iss too worried about replacing it.

She will hold and if she doesn't then I have an excuse to upgrade

 

[Yellow Horse]

Yes I'm running 410's with a 28 inch tire as well crossing around
6600-6700 rpm

Don't fear the gear

Great times.

My setup is close to yours right down to the tune other than the 4.10's but I still have to do a few more things before I make my first pass like a 1-piece D/S and linelocks.

How much HP and torque are you making and do you have any fuel mods like fuel injectors?

 

[Robertt305]

Stock only a BAP. She is around 700 rwhp. Can't emember how much tq but it's like mid to low 600's

I'm planning on going E-85 very soon.

 

[Rob Nelson]

Great times!!!

 

[adidasUNT8]

Congrats! Those are some nice slips there..