Ok so ive got a couple questions. I bought a set of Bilstein specific MM coilovers for the front of my Mach1 with 250lb springs and then found a set of Bilstein specific MM rear coilovers with 500lb springs.
1st question, is 500lb a good spring rate for autox/roadracing?
2nd question, what should I put on the fonts to match the rears, 500 as well or is it a ratio for fronts to back?
Thanks!
1st question, is 500lb a good spring rate for autox/roadracing?
2nd question, what should I put on the fonts to match the rears, 500 as well or is it a ratio for fronts to back?
Thanks!