Too sick, watching close
With the 2.97 t56. Staying with the 3.73? Or changing
We will stay 3.73 for the time. See how the car works
Too sick, watching close
With the 2.97 t56. Staying with the 3.73? Or changing
Nice looking turbo kit. I was hoping that using the stock headers would keep the price down more. At least it should make install easier.
Not real sure how hard we are going to push it.
I guess as far as jeff wants to push it.
We can make 700 No problem on around 8 PSI
:beer:
Thanks for posting up the Thread Eric, can't wait until it's done!!
I'd say we will probably stop around 650-700rwhp for now, as I don't want to push my limits on the block and/or rods. We will see.
Went with the 2.97 trans with the closer gearing for drag racing. If we find the 3.73s are too much with a 28" tire, we will gear down. Planning to run a 28" ET Drag for the track since it will be a Stick car and Have M/T ET Street 2s 305/19s for the street.
This is Phase 1 of the project until Winter time. Going to build a bullet proof motor then, add bigger primary headers and tubular K member then when the motor is out. This should be plenty fast until then though and hopefully the Boss motor holds up with the stronger pistons and better valve springs (less concerns on valve float/back pressure).
Car also has a full suspension: Metco Billet LCA, LCA relo brackets, JPC Racing UCA with BMR mount, BMR Adj Panhard Bar and FRPP Boss 302 lowering springs.
Running JPC's over axle pipes (no clearance issues with the lowering springs!) and a GT500 Magnaflow Street Black Quad Axle Back. We will have a 3" electric cutout to dump the exhaust, so no worrying about exhaust restrictions at the track.
:rockon::beer:
I cant wait to see it finished either!! its going to be one BAD BOSS.
:beer:
Now we just need to find you a E85 station and we can really crank it up
I think there is one station about 15 miles from me that carries E85, but I need to go check it out in person. Definitely want to test out the KORN! op:
Not real sure how hard we are going to push it.
I guess as far as jeff wants to push it.
We can make 700 No problem on around 8 PSI
:beer:
Jeff who?
Any interest in selling just a hotside kit? Im planing on going turbo this winter and wanting to fab the cold side, we can get everything else
Jeff the guy who owns the car
Otherwise known as Poof100
Hmm I have a friend named Jeff that lives up that way with a white boss but I dont know if he has a screen name on here. Dont suppose you know Jeffs last name?