Last edited:
Fastest nitrous coyotes
- Thread starter autoxstang
- Start date
I'm curious about nx. I don't hammer on my car a lot. Why is the best/safest kit? The jms kit seems good.
How far are from the line are you hitting 4th gear or are you making it through in 3rd?
I am CYRUS in the left lane (187). C/J intake, Kooks, Circle D 4c, 3.31 gear, on M/T 275/60s. Hit it a 100 shot. Going back this weekend with a set of new M/T Pros and a 150-shot.
It hits 4th about 60ft from the line. I going from the 28.0 inch tall street M/Ts to the 28.2 inch tall Pros. Testing this weekend.
I aint gonna be fastest throwing 100 shot at a stock auto coyote but, I'll certainly share results. I decided I wanted a simpler way to access extra power I really only need at the strip anyway, over my previous cars complicated and near lethal supercharging effort.
^ in for results as I'm the same way. Only need it for the track.
This is with the new M/T pros, Track was no-prep, temp bout 70, happy to have the 60ft back in the low 1.40s! Car do not like the 150 hit, No hook, ETs -10.50 and a 10.58. I will stay with the 100-shot for now....my wife said!!!
Last edited:
Sounds like it's time for a progressive
What kit would be most reliable? 100-125 shot... I'd want it to be very safe! Looking for some info.
You running a boosta pump?
This is with the new M/T pros, Track was no-prep, temp bout 70, happy to have the 60ft back in the low 1.40s! Car do not like the 150 hit, No hook, ETs -10.50 and a 10.58. I will stay with the 100-shot for now....my wife said!!!
no.
The best I could get was only 129.65mph. That's only a 1.12mph increase from the 100-shot, not worth the trouble. I have got to check around, may be time to upgrade the fuel system, I only have 47 pound injectors.
Thinking you may be one of the fastest no?
true , unless you have a professional install and set it up
Last edited:
I don't get on my car much, but want to take it to the track a few times a year and would like high 10's. I'll be full bolt on soon. Seems like 100 shot could do it. I'm def an am though. Advice please!
Anyone besides Christian using a direct port setup? I have a Boss intake plumbed with a Nitrous Outlet direct port kit. I haven't hooked up the kit yet since I want to do a stand alone fuel system. Been trying to whittle down my times on motor in hopes that once I do spray it I can hopefully be bottom 10's.
Not on here much because of work but I have been running a Nitrous Outlet DP kit on a Boss intake for a few years. With stock motor on 150 it would run 6.80s @ 104 with a T56. RGR built motor best ET was 6.0 @ 114 on 200 shot with a 4R70. The only time I ran 1/4 mile it went a best of 9.66 @ 144 spinning pretty bad. Freshening up the motor now and adding Darton sleeves so I can lean on it a bit hopefully soon.
Users who are viewing this thread
