Still have a few things to sell from the 2V parts stash ive acquired when i was planning on building the stang, its now gone and also some Lightning parts from the 4V 76/75 im doing now.
Also looking for some 4V stuff and a good 5.4 block. Perfer NVH but any will do at this point!
Trades welcome as long as its something i need - 4V 5.4 stuff. already have assembly and heads, need most everything else. Also any good fuel sytem stuff that would be of use on a 5.4 4V build.
Thanks and Enjoy!!
IM LOCATED IN MONKS CORNER, SC. 29461
THIS IS ORIGINAL ADD FROM LR WITH PRICES, PICTURES AND DESCRIPTION OF ITEMS STILL AVAILABLE:
Bunch of new edge parts for sale. all are new never installed.
prices are shipped **EXCEPT SHORT BLOCK**I WILL NOT SHIP MOTOR**
**PM'S ONLY**
**PAYPAL WITH 3% OR SEND AS GIFT**
NO TIME WASTERS PLEASE
*ALL ITEMS ARE NEW/NEVER USED, MOST STILL IN BOXES*
1999-04 mustang parts for sale
frpp 99-04 alum driveshaft - SOLD
acc black carpet - SOLD
cj pony ds safety loop - 30
oem cam gears w/bolts- 60
mmr timing set - SOLD
mmr dual catch can kit - 300
termi fog lights 80
termi bezels - 50
4 pt. harness - 50
frpp 3.73 w/install kit - SOLD
steeda shfiter handle - SOLD
steeda tri ax 997-0158 - 175
steeda tri ax tko 500/600 - SOLD
lfp black billet 5.0 shift knob - 35
belt tensioner - 35
frpp - a/c delete - 45
p/s pulley - 25
autometer a pilliar 3 guage pod - 60
autometer steering wheel gauge pod - SOLD
upr 2000 anti roll bar kit - 350
upr axle braces - 75
pmas 3.5 blow through MAF - 250
professional products - 75mm TB - 160
frpp trans spacer plate - 35
smr upp and lower torque box kit - 45
coil packs - 50
termi bumper - 125
team z tubular front bumper support - 140
team z 8.8” bottom brace - 110
steeda sub frame connectors - 175
bbk adjustable clutch cable - 45
MHS budget shortblock - SOLD
ALSO I HAVE SOME LIGHTNING PARTS:
Fresh rebuilt Ported blower - 625
polished Accufab SBTB - 300
Stage 2 comp cams w/cam gears - SOLD
6# lower - SOLD
C&L plenum - SOLD
C&L elbow - 150
SCT 2800 MAF - SOLD
90mm Lightning MAF housing - 50
Motoblue AUX idler/pulley - SOLD
OEM pulley bridge - SOLD
OEM tensioner - SOLD
H/E hard lines - 80
unknown ceramic coated LT headers - SOLD
Also looking for some 4V stuff and a good 5.4 block. Perfer NVH but any will do at this point!
Trades welcome as long as its something i need - 4V 5.4 stuff. already have assembly and heads, need most everything else. Also any good fuel sytem stuff that would be of use on a 5.4 4V build.
Thanks and Enjoy!!
IM LOCATED IN MONKS CORNER, SC. 29461
THIS IS ORIGINAL ADD FROM LR WITH PRICES, PICTURES AND DESCRIPTION OF ITEMS STILL AVAILABLE:
Bunch of new edge parts for sale. all are new never installed.
prices are shipped **EXCEPT SHORT BLOCK**I WILL NOT SHIP MOTOR**
**PM'S ONLY**
**PAYPAL WITH 3% OR SEND AS GIFT**
NO TIME WASTERS PLEASE
*ALL ITEMS ARE NEW/NEVER USED, MOST STILL IN BOXES*
1999-04 mustang parts for sale
frpp 99-04 alum driveshaft - SOLD
acc black carpet - SOLD
cj pony ds safety loop - 30
oem cam gears w/bolts- 60
mmr timing set - SOLD
mmr dual catch can kit - 300
termi fog lights 80
termi bezels - 50
4 pt. harness - 50
frpp 3.73 w/install kit - SOLD
steeda shfiter handle - SOLD
steeda tri ax 997-0158 - 175
steeda tri ax tko 500/600 - SOLD
lfp black billet 5.0 shift knob - 35
belt tensioner - 35
frpp - a/c delete - 45
p/s pulley - 25
autometer a pilliar 3 guage pod - 60
autometer steering wheel gauge pod - SOLD
upr 2000 anti roll bar kit - 350
upr axle braces - 75
pmas 3.5 blow through MAF - 250
professional products - 75mm TB - 160
frpp trans spacer plate - 35
smr upp and lower torque box kit - 45
coil packs - 50
termi bumper - 125
team z tubular front bumper support - 140
team z 8.8” bottom brace - 110
steeda sub frame connectors - 175
bbk adjustable clutch cable - 45
MHS budget shortblock - SOLD
ALSO I HAVE SOME LIGHTNING PARTS:
Fresh rebuilt Ported blower - 625
polished Accufab SBTB - 300
Stage 2 comp cams w/cam gears - SOLD
6# lower - SOLD
C&L plenum - SOLD
C&L elbow - 150
SCT 2800 MAF - SOLD
90mm Lightning MAF housing - 50
Motoblue AUX idler/pulley - SOLD
OEM pulley bridge - SOLD
OEM tensioner - SOLD
H/E hard lines - 80
unknown ceramic coated LT headers - SOLD
