I'm looking for a mammoth intake for Kenne Bell 2.8. PM me if you have one for sale! Thank you!
Plenum going back of superchargerAre you looking for an intake that goes into the fender or the inlet on back of blower?
Plenum going back of supercharger
I do have a regular 2.8 and yes I am wanting to put a mammoth on it . I was not aware that the mammoth would not bolt on. I dont want to do something that will give me a bunch of issues.Just making sure you know the mammoth is not a direct swap. Won’t go on a nonmammoth. If you have a nonmammoth and want a bigger inlet you need the Behemoth inlet. Ran it a few years very nice piece.
Do you have pics of this inlet?I do have a regular 2.8 and yes I am wanting to put a mammoth on it . I was not aware that the mammoth would not bolt on. I dont want to do something that will give me a bunch of issues.
Do you have pics of this inlet?
Does KB build this plenum? Why do you no longer use itHere is an old link of my Behemoth. It has pics and shows it being installed:
https://www.svtperformance.com/threads/a-little-work-on-the-behemoth.768691/
Does KB build this plenum? Why do you no longer use it
I don't know if the Mammoth not fitting a standard KB is completely true. I am looking at adding the Mammoth Inlet to my standard inlet 2.6. The differences are the 2 rear water jacket fittings. The standard inlet fittings are vertical thus interfering with the Mammoth inlet, where as the Mammoth KB's water jackets are horizontal. If you could relocate them I believe it would work, at least that's what I plan on doing.
Godstang, how much hp did you gain from using Berry's inlet?