Very nice. I would be more inclined to do this if there was no drilling required.
Sent from my SM-G970U using Tapatalk
Sent from my SM-G970U using Tapatalk
Curious if they are doing the machine work to the back of the caliper?Looks like LMR is also jumping in on the ATS caliper bandwagon.
Cadillac ATS 4 Piston Brembo Caliper Kit - LMR.com
Curious if they are doing the machine work to the back of the caliper?
They don't even mention needing to mill them.Curious if they are doing the machine work to the back of the caliper?
They don't even mention needing to mill them.
They technically still fit without milling. The rotor isn't centered...but it looks like it will work.
From the Brembo Racing Catalog, it states that the caliper must be mounted in a symmetrical position with respect to the rotor centerline: The difference between the left side and right side pistons to rotor must be 0.6mm (0.024") MAX.
Ya he is pissed because he was ripping people off at over twice the cost. (Was charging over $800 for less than $400 in parts). We are here to help the cobra/mustang community not rip the community off... The info is not wrong he is just trying to make what he has "look" better.
The info I did was from the install I did. If you like it use it. If you don't then don't. I don't really care as I am not losing any money either way. The brakes work great on my car and are light years better than my stock.
There's a post on Facebook now saying he took a guys money in July, delivered no calipers and blocked the guy. Hopefully svtperfo will permaban the guy.
still curious to see why the j64 he was charging more for is superior.
Did his bread get deleted??