What did you do for your Terminator today?

[cmm3]

I tried to find the casting date of my heads but couldn't find them. Must not be looking in the right spot. Can they be seen from the top of the engine???

 

[apex svt]

After I break low 10’s on this simple set up, I’m gonna be going to either a VMP 2.3, or I’m gonna try and get an old school Kenne Bell just for the nostalgia.

I’m sure you will, but keep us updated on how it runs at the track! Still playing the Eaton game over here as well.

 

[robvas]

Took the drag radials off and put them in the basement...winter is coming

 

[LS WUT]

I’m sure you will, but keep us updated on how it runs at the track! Still playing the Eaton game over here as well.

Will do man! Hoping to recover before I lose my boost weather down here in Florida.

 

[2003RedfireVert]

I tried to find the casting date of my heads but couldn't find them. Must not be looking in the right spot. Can they be seen from the top of the engine???

I could be wrong but I believe they can be seen above the exhast manifolds...which means, you will need to be underneath. Someone will correct me if I'm off here.

 

[TerminatorCobraJP]

I tried to find the casting date of my heads but couldn't find them. Must not be looking in the right spot. Can they be seen from the top of the engine???

I started recording a video on my phone and then put it down into my engine bay from the top and I was able to see pretty much all the castings on my heads. That's how I found out my car has AG heads.

Sent from my SM-S536DL using the svtperformance.com mobile app

 

[cmm3]

I started recording a video on my phone and then put it down into my engine bay from the top and I was able to see pretty much all the castings on my heads. That's how I found out my car has AG heads.

Sent from my SM-S536DL using the svtperformance.com mobile app

It the casting on the 'inboard' side of the head, or the 'outboard' side, by the exhaust manifold?

 

[P49Y-CY]

^exhaust

 

[JaCobro]

It the casting on the 'inboard' side of the head, or the 'outboard' side, by the exhaust manifold?

It’s above exhaust manifold. If you have a flex head mechanics mirror you can see it from under the hood. Or try with your phone like JP said.

 

[MG0h3]

It’s above the exhaust manifold.

I think the pass side is over the front port.

Drivers side is rear.


Sent from my iPhone using svtperformance.com

 

[TerminatorCobraJP]

It the casting on the 'inboard' side of the head, or the 'outboard' side, by the exhaust manifold?

It would be above the exhaust manifold. I managed to fit my phone in there on the drivers side near the firewall pretty easily and get a good shot of the casting. It did take me a few attempts before I actually got a good video of the casting. If you do it my way, make sure you record with the flash on too.

Sent from my SM-S536DL using the svtperformance.com mobile app

 

[01yellercobra]

Hit up a local show. Lost to a couple stock new GT500's and Mach's. But it was a crowd favorite.

 

[2003RedfireVert]

Hit up a local show. Lost to a couple stock new GT500's and Mach's. But it was a crowd favorite.

**** those new turds!

Looking good dude!

 

[01yellercobra]

**** those new turds!

Looking good dude!

Lol. The dude in the GT500 wore driving gloves and put knee pads on to clean his wheels. In the grass.

Thanks. The wife knows how to take some decent pics.

 

[cmm3]

It would be above the exhaust manifold. I managed to fit my phone in there on the drivers side near the firewall pretty easily and get a good shot of the casting. It did take me a few attempts before I actually got a good video of the casting. If you do it my way, make sure you record with the flash on too.

Sent from my SM-S536DL using the svtperformance.com mobile app

Thanks for the tip. I couldn't get my big mitts down there, and ended up dangling my phone down the side of the engine on a string to get a shakey video of the casting. Happy to see it is a "-DB" casting.

 

[CobraBob]

Hit up a local show. Lost to a couple stock new GT500's and Mach's. But it was a crowd favorite.

She looks awesome, Bob. Sounds like it was a decent show. I think your Mystichrome will always be a "crowd favorite".

 

[01yellercobra]

She looks awesome, Bob. Sounds like it was a decent show. I think your Mystichrome will always be a "crowd favorite".

Thanks Bob.

 

[Goocher0310th]

Lol. The dude in the GT500 wore driving gloves and put knee pads on to clean his wheels. In the grass.

OMFG, knee pads. should have had the wife take pics of that. What a turd.

 

[BOOGIE MAN]

OMFG, knee pads. should have had the wife take pics of that. What a turd.

The guy's boyfriend was probably looking out for shit poster photographers

 

[CobraBob]

Someone snapped a photo after he finished cleaning the wheels.