I'll have to check into the Brembo seal conditioning fluid. Yeah, bled both sides of the calipers. I'm wondering if the ABS module has air in it & needs bled?
I just rebuilt the front Brembo's on my 2012 Boss (new seals/dust boots). I didn't split them in half, just cleaned them & installed the seals, lubed the pistons with brake fluid & reinstalled them in the calipers then put the calipers back on the Boss. I bled them then hit the brakes &...
The NT01's need replaced on my 2012 Boss...before I buy a new set, anyone use a track tire that performs better? I've only used the NT01's, & I don't have any real complaints about them, just wondering what else is good out there.
So I jacked up the Boss tonight, started it up & found the coolant leak...at the oil cooler. It looks like from the top metal tube the inserts into the cooler. This happen to anyone else's oil cooler???
Now I'm obviously not asking for a technical diagnosis, but wondering if this happened to any other Boss owner. It threw that code & literally shut everything down in the car including the power steering. I did notice some coolant leakage from around the oil filter as well after it threw the...
Thanks KBBoss302! I crawled under & took another look. It looks like if I put the back half of the passenger side onto the drivers side, in order for it to fit over that nut head the axle tube won't be at the 9 o'clock position bit more like an 8 o'clock position. Was this the same for you as well?
Question for you Fays2 guys. I'm be installing it on my 2012 Boss 302 & the instructions say about positioning the passenger side tube mount around the axle tube breather. Well....since the breather nut is on the drivers side & not the passenger side on the Boss, did you guys swap the back piece...
UPDATED AGAIN: the intake & CAI are both sold, the throttle body is still for sale & price is reduced.
I recently upgraded the top end of the engine in my 2012 Boss 302 LS, so I don't need these anymore. All prices included shipping in the continental US. If I don't answer messages quickly, I...
I'll have to give those methods a try. I went ahead & ordered the VMP 67mm throttle body though to get the Boss running. It just bugs me that we have to do work like that on the monojet when the thing already costs $600...it should work out of the box! Thanks for the responses, it'll give me...