Yes!! They say Part Number CR3Z19980A needs to be replaced. It failed some kind of pin-point test or whatever - anyway, it should be installed in 2 more days!
Late reply on my part - Apparently the HVAC control (Part 19980) checks out fine. This is the console that is located at the bottom of the entire controls section. The screen's touch functions all work - Except the Power for the AC/Heat.
The module that is Behind the screen is NOT testing...
I'll be visiting him later this afternoon to pry out some information...I'll let you guys know and like you said, hopefully, this is a rare occurrence!
I'm not sure as my mechanic is doing the work and research, although since there is a lack of info from him (language barrier?) I thought I would look for myself.
Does anyone know how/where I can find the item that allows my AC/Heat to Power On? My AC and Heat will not turn on - Apparently it is the Power Module (according to Ford) but they cannot find one, nor can I seem to get the correct part number?
Your help is greatly appreciated!
- Gary
The glass I have in my windows have a lot of scratches, so before I go to tint, I would like to replace the glass...do I go with a local glass dealer or ford or do you guys tend to order repacements?
Well, I have done it before and wow do I get a headache, but I am getting ready to drive for nearly 20 hours and I need to quiet down the exhaust note.
I don't have any of the 4 catalytic converters in the car, stock mufflers, and an x-pipe.
Here are a couple pairs of cats I am looking...
It seems after my last oil change (and I have forgotten which filter I used) the oil pressure is high...the needle is at the "A" in "NORMAL". It's fairly steady at that point no matter what kind of driving...
It would also be interesting to know the psi value if anyone knows...
Thanks in...
I am looking to get an I-Phone and I see the competitors have some decent phones, but I think the quality and functionality are not quite as good. Most of all I am looking at Web browsing and the clarity of the screen.
There is a new phone release this weekend, the Palm Pre, that is supposed...
I recently seem to have lost the center cap to one of my Saleen wheels. I have found a few sites that carry center caps for wheels, but the black ZR logo looking one...I would appreciate any ideas...thanks!
I don't have a close-up picture of the wheel, but here they are on the Cobra:
...and re-attach it?
I stuck the stainless letters on my new black paint...oh man does it look good...but, a gremlin got into my garage and moved the "A" up, so now it looks bad!
How do I get the letter off safely and then re-attach it?
Thanks for any help!
I have the standard setup and am getting ready to add an intercooler and increase the boost. Using a 2.87" pulley, what belt size will I need?
Also, what MAF would you recommend?
Thanks for the help!