Just seeing what you guys think
I have a 01 mustang gt with roughly 110k miles on the body. The list of mods are quite extensive for this car and have been all done top notch.
Car was originally silver and then painted orange
-04 OEM cobra swap all 21k miles
-supercharged 4v forged
-t-56
-fuel...
Opened up the oil filter bought brand new from pepboys and there is no plastic cover over the oil filter intake. Also paint is all over the sides of the oring and a 1/8th of the oring mating surface was covered in paint! The threads also had some lynt from the box or some type of contaminant...
After seeing Racebronco2, tiger racing, and 03 DSG Snake's hoods I had to make one. I have wanted to do one for a long time but didn't want to cut an oem hood due to cost. Last week on craigslist an aftermarket cobra hood of some unknown brand popped up for cheap so I scooped it up. Here is the...
I had to run some stock mach wheels with crap tires but still had a good time. I was 4 seconds off the lead car which was a brz.
Excuse the shaky hands and the crazy loud honda LOL.
https://www.youtube.com/watch?v=cR_34_sKJjI
I am making a brake bracket to fit 2014 gt500 calipers onto a 04 cobra. I was going to copy vintage venoms style of setup but did not want to run a 24mm rotor spacer due to many factors. In this case I have designed another bracket that allows me to only use a 3mm rotor spacer. The only issue is...
I sold my bbs rk's winter last year and picked up a second hand set of 4 18x10 ccw c10s. These wheels are the only ones I could find that could fit the OD of the caliper except for the bbs specially made ones from ford racing which i dont necessarily like. Vintage Venom went out of business so...
I am looking to buy 2013-14 GT500 Rotors. Used or new. If you know where to buy them from an auto store for an oe replacement that would help also. Oreillys and advanced both have the wrong rotor sizes and autozone is sold out.
Borla Stinger mufflers 250 shipped sold
Nitto tires
Nitto Nt05 295/35/18
Nitto Nt555 255/45/18
600 picked up OBO sold
Sct MAF 160 shipped
Koni yellow single adjustable shocks for SRA $120 shipped
Contact me at (386)341-9011 call or txt. Located in Daytona Beach Florida
Just installed an irs in my terminator swapped gt. When driving something from the rear is thumping. It is speed dependant and happens on acceleration and deacceleration. It sounds like a flat spotted tire. I feel like its the calipers. When i was bleeding them they did not bleed like the...
Im pulling my cobra out of storage here in a few days (nice old florida) and dont know if i need to change the oil. I have started it roughly once every 3 weeks to full operating temp after 30 minutes of idle and driving. The oil has roughly 1500 miles on it. Mobil 1 5w 30 if it makes a difference.
The corbeau fx1's have roughly 4k miles on them but look brand new. They come with brackets to bolt into any 99-04 mustangs. They will also come with the seatbelt female connector. They have 0 fade and 0 rips. There is one little part that is hidden between the console and the seat where the...
I am trying to find a set of wheels to fit the 2014 gt500 calipers and rotors on my 04 cobra. I need some measurements from you guys before I buy everything to make sure it fits. I have added a link to the thread to show you what I need. Any help would be greatly appreciated!
,Hoyt
Link...
Rear end is out of a 01 gt. Crush sleeve was overcrushed and has to much preload. Rear END WILL NEED A REBUILD. This a perfect setup for someone looking for a housing. Comes with stock upper and lower control arms and stock gt brakes. Mm coilovers are in great shape with koni yellow single...
Im doing an IRS swap so I have no use for these anymore.The shocks and coilover kit have 13k miles on them and are in great shape no odd noises or damage of any shape. The shocks are painted purple to match my color scheme. I will post pictures of them before they were painted and after...
Im doing an IRS swap so I have no use for these anymore.The shocks and coilover kit have 13k miles on them and are in great shape no odd noises or damage of any shape. The shocks are painted purple to match my color scheme. I will post pictures of them before they were painted and after...
I know this topic has been done before but since i just picked up a beater to put the snake in hibernation i was interested to see what you guys daily. Please dont post pics of your cobra unless you consider it a beater paint faded door dings all over lol.
Just picked up this beauty. 1994...
Im doing a vintage venom brake kit on my new edge and need to know which rims fit. Im trying to find which rims will fit over the calipers without hitting the inner barrel of the wheel. If someone could give me a measurement from the center of the hub to the highest point on the caliper it would...
No curb rash only one small chip on one of the rims that is all. Great looking BBS RK. Wheels are getting quite rare in staggered setup
2250 shipped for wheels
2600 shipped with nittos nt05 295 35 18 and 255 45 18
call or txt hoyt at (386)341-9011
I have a whipple 2.3l that I bought off a member on here and just never got around to putting on due to my pinion bearing going out in my rear end so that will be taking all of my funds. The whipple has 5k miles and is in great shape. It spins freely with no odd sounds and the rotor pack looks...
Does anyone know if these will fit? Supposably these need less offset than the cobra r brake setups. If not what size spacer? Heres the link http://www.vintagevenom.com/sn95-mustang-f14-front-brake-package
I had this seal masked off with some really non agressive masking tape so I could clean the elbow out before install and when I pulled it off it stretched some parts of the seal. Is there a seal to replace it or do I just use rtv to seal it back up?