Search results

Well I called SCT today. They confirmed the BA3000 does have a temp sensor built in. Now I just have to find a factory size Maf harness that has six pins instead of four. They did not have any wiring diagrams for there MAF. They just told me that the wiring would be the same as the factory unit.

That’s what I thought was the logical choice. The HPX Maf. I’m not sure why my tuner suggested the SCT Maf aside from the fact that he’s comfortable tuning them. So using the SCT Maf does require me to make an extra hole for the IAT sensor then?

Well I’m wrapping up the install on my on3 FF single kit for my 99Gt. I have some confusion involving the IAT sensor. My tuner recommended I use the SCT BA3000 so that’s what I bought. The tube it comes with was much larger then the on3 pipe so I had it welded into the pipe. Now I thought a slot...

The kit came with two empty spots to tap into on the oil filter adapter plate, but the actual plate is a half inch away from the manifold. I don’t see how anyone could actually use those for anything. I just have them capped off with the supplied caps.

So I picked up at On3 Forward Facing kit from LMR for my 99GT. I started to install it after reading over the basic instructions sent with the kit and finding any and all information on line searching google. I know I am at least missing one piece in this kit & There are still acouple areas that...

In Ohio SF was the cheapest for good coverage. In NC Geico beat all the other Big insurance company’s by a good margin. SF and Farmers were the highest for me now and that’s after 6-7 years with SF. It pays to shop around, I don’t know how true it is but a Geico rep told me they are the cheapest...

I think he’s on to something here.. he could probably land a job with General Motors.. [emoji23] Sent from my iPhone using svtperformance.com

Love that color, what motor do you have in it? Sent from my iPhone using svtperformance.com

.

Just like the title says guys. Looking for a shop or person, to either put gears in or help put some 4.10's in my stang. One of the few mods im not 100% comfortable myself. Looking to get it done in the Greensboro NC area. Any input would be superb!!

So im having a vibration issue directly after I put in a UPR tubular k with tubular control arms, coilover, cc plates whole 9 yards. K member is relatively quiet and rides nice other then a harsh vibration after about 80-85 mph. Im wondering what it could be. Usually I dont post a question like...

I don't know, Maybe Im just a total A** hole but this stuff kills me. I often surf Craigslist for spare parts, I happened to click on this today after reading title. This car is something fierce. Love those custom Shelby seats hahaha. http://greensboro.craigslist.org/cto/4869552729.html

Im currently piecing together a single turbo build for my 99 gt. Upr k just installed along with coilovers, getting ready to purchase the turbo kit fairly soon. It should be complete except for fuel delivery. Realistically id like to be able to support 500whp eventually. probably around 400whp...

Hey everybody. I know this issue has probably been brought up countless times, but I figured it would be a good excuse to make a post and try and post my first picture ever. Hopefully they uploaded correctly. Bought this clean 99 gt off my bro in law about 6 months ago. bought it with 59k...

Well this is probably a long shot, But im looking for a MGW shifter for a t45. I know there has got to be someone out there with one laying around. If you do have one you wouldnt mind parting with let me know via here or a pm! If not I will just get one off the website. I always like checking...

Might be getting back in to the mustang scene again soon. I've had the itch since I sold my Cobra over a year ago. I might be taking a stang off my soon to be brother in laws hands. My main question is what do you all feel is a fair price? It's a 2000 gt coupe, black 5sp spotless. He's the only...

Has anyone found a 2011 and up 5.0 manual for 20k or under? That is about as high as I could comfortably go. It dosent' seem like there is any out there yet. Still a little to new I guess.

Well, After getting out of the Marines and trying to find a job for the past 6 months. Ive landed one in reidsville nc which is a small town not far from greensboro NC. Im currently living in Wilmington NC, and I love it. Im really not looking forward to the move but its tough finding a decent...

There is a good possibility ill be selected for a job in Orlando, I currently live by Wilmington NC. I've never been to Florida but I have always wanted to visit! What is Orlando like? I def don't want to live in a big city. Lol what are some suburbs around Orlando that are more on the quiet...

Looking for some recommendations that won't break the bank for my wife's SUV. Basically just looking for something with no road noise and smooth with good traction. No snow to worry about we're I'm at though. Have some wranglers on there rite now that weren't the cheapest but boy are they junk...

Desperately seeking employment lately. Currently live around Wilmington but I just cant find anything worth taking. Ive been unemployed since April after I got out of the Marines. No college education here, but a skill set working with and managing hazardous materials. It has been nice sitting...

Well I sold my 98 Cobra awhile back, and ever since then Ive had the itch to buy another stang. I will be in the market for one in around 3-6 months and I havent been able to make up my mind wether i want to pursue an s197 or a Termi. Ive alwasy wanted an 03/04 cobra, but with my record of...

BBK ceramic longtubes. Came off my 98 cobra. They were put on and came rite back off, practically brand new! 350$ plus shipping 4404539789

I have a pretty big list of parts for sale that are mostly off a 98 Mustang Cobra with the 4.6 4V, * BBK Ceramic Long tube headers, will fit 96/98 Cobra, 03/04 Cobra, 03/04 Mach 1 excellent shape used for about 500 miles. 350 $ * Complete B heads from 98 Cobra Excellent shape, has everything...

I'm desperately needing a pipe with cats on I can throw on to get my inspection done. It would be full length for the stock manifolds. Let me know what you have, the stock one would be great!