I have a bumper from an 03 mach 1 (torch red). it has the grill delete, chin spoiler, and fog lights. I converted my mach 1 front end to the cobra front end and basically just stored this stuff. I am just trying to get rid of this stuff, so make an offer on some or all of it. Sorry I don't have...
Well I don't have a cobra anymore, and I found these laying around my garage so I figured I would try and get rid of them. I have a poted stock throttlebody, and I have a stock plenum that I had welded up that I just never finished porting (I will however finish porting it if you want)...
I have a powerdyne supercharger for sale. This is a complete kit with upgraded bypass and power pipe included. Everything you need to install down to the nuts and bolts. The only thing I don't have is the FMU and boost retard module as I didn't go that route. I used larger injectors/MAF and had...
for sale, a new unused in the box ford racing clutch part #: M-7560-D46
I purchased this for my 03 cobra, but sold the car before I had a chance to install it. This kit is the same one pictured in the links below.
here is a link to the part: 2003-04 Cobra Clutch Kit Modular Depot - Your...
I have, for sale, a new unused, in the box Mac prochamber that bolts up to stock manifolds. I bought it for my cobra, but ended up selling the cobra before I installed it.
here is a link to MAC's website showing the exact part you will be getting: Mac Performance - performance accessories...
ok, So I am trying to decide what I should spend my "birthday money" on for my next mod for my 03 cobra... I have $500, but I already ordered an off-road prochamber so that cuts my available amount left down to $230ish. So I figured the SVTP family could help me decide my next mod.
Current...
I just spent the day porting and polishing my throttle body and I figured I share a couple pics of my work... I'll be doing the plenum tomorrow. I am also debating trying to polish the outside of the T/B, but there are a lot of small areas and I don't know if my fingers can take the abuse so if...
Well, for my first time at the track I don't think I did too bad. 3 runs with a best of 12.3... I think the car has 11's in it once i get that driver mod finished :banana:
1st run:
2.127 60'
12.7 @ 115
2nd run
2.085 60'
12.3 @ 117
3rd run
2.158 60'
12.6 @ 116
All runs were done...
Anyone have any experience with them? Just curious to see if they are reputable or not... if anyone has any personal experiences they could share about them that would be great... I'm thinking about taking my cobra to them once I put a smaller S/C pulley on.
Hey, does anyone have a pulley puller to remove/install the pulley on the 03/04 cobra supercharger? I want to do a pulley swap, but I'm having a hard time justifying buying a tool I only plan on using once. if anyone has one I could borrow I would greatly appreciate it.
anyone know what size bolts (length, thread etc...) that the Billetflow IRS brace uses? I want to install my brace, but I don't have the bolts so I figured I would just go pick them up at the hardware store, I just need to know what size.
well my pump went south on me so instead of just buying a new pump I decided to rebuild mine. I found this link that describes how to fix it and I felt it was really helpful. Since I didn't see anything like this on this website I thought those having pump problems could benefit from this. I was...
ok, I decided to do a write-up on this since my pump was going out and I found general comments on how to do it but no actual "how-to" with a step by step and pictures. so here goes: this is a pretty straight forward job, and can be done in about an hour with basic hand tools in your driveway...
So anyone know where I can get the coolant from? the local autozone doesn't seem to have it and I wanted to replace my intercooler pump today after work. Do I have to get it directly from ford? or does another part store typically have it?
I am going to pick up my 1st ever cobra in less than 24 hours and I'm already too excited... I don't know how I'm going to get any sleep tonight!
It's on 03, completely stock, 70k miles, silver w/ chrome wheels. It's nothing super special, but I am stoked to finally own a cobra! man tomorrow...
Well, I haven't seen this one yet, but I don't even have a car posted for sale on craigslist so... I guessing the link will ask for all kinds of personal info and stuff, anyone else seen this? Let's hear some ideas for messing with them...
"Hello there Good day. Im really interested on your...
I am having a gift exchange party at my work, and I need to come up with a gift that is not gender specific, and less then $20. Let me hear your ideas?
I have a compucar single nozzle wet system (was on the car when I purchased the car) it only comes with the jets that are currently installed, and I am not sure what size the jets are. comes with nitrous and fuel solenoids, nitrous and fuel lines, nitrous pressure gauge, purge system, nitrous...
like new X-cal2, unmarried, it was on my mildly modded mach 1 (exhaust and intake), and has one tune for it. but can be used on mach1's and GT's but I suggest getting a proper tune for your vehicle. still have original box and instructions $225obo
I've got a set of silver cobra valve covers, they fit 99-04 cobra's with the coil on plug style ignition. $175.00 obo, make me an offer I wan these things gone.
Well, I sold my mach, so the after market parts must go, here is what I have:
MRT Street Smart CAI- SOLD
MGW short throw shifter (orange handle)- SOLD
Steeda billet A/C knobs- SOLD
Polished Ford Racing Coil Covers- SOLD
Mac Prochamber- SOLD
Maxium Motorsports Caster...
Hey everyone, I'm new to the truck world so bear with me. I just purchased an 07 F150 FX2, and I was wondering if I could use the Xcal2 from my mach 1 to tune my F150 with (of course I know it would need a different tune)? Also I have been hearing that those who have purchased new 07' models are...
Hey everyone, I'm really tired of washing and waxing my car and still being able to see those tiny swirl marks in the paint! So for Christmas, I am telling my girlfirend to get me some quality polishing/ waxing equipment. What would I need to get my car looking like new? (buffer-what type...