Search results

This has the three most recent updated tunes for 91 Octane from Unleased Tuning. They make the car a whole new beast. Comes in box with everything. Perfect condition. 325.00 OBO. (Buyer pays shipping) My loss is your gain.

How do you go about purchasing a used SCT device? Isn't it linked to the vehicle it was originally on? Will you still be able to get tunes through the company it was originally purchased from?

I did a small clip today with the stock rear motor mount. The vid is not under full throttle but just tapping the gas here and there and you can see the amount of movement. Second vid is the electric focus rear mount. It took about 1/2 in of play out. Not too stiff and not too soft. (sorry...

I am posting this for a friend. The car is located in Missouri. It is completely built and was built to run. It put down 645rwhp. I will list the mods to the best of my knowledge. Car has 54,000 miles on it, the motor itself only has about 2,000 miles on it. If you have any questions just...

I posted this on a few other sites and I'm curious to see who is running aftermarket plugs. if you're running after market plugs which ones are they and are they worth the money?

I got a second one as a gift from a friend so I obviously don't need it. Its up for grabs on ebay. Great mount to have for the ST. New 2013 Ford Focus St Performance Lower Engine Torque Mount Electric | eBay If you have any questions feel free to post. Thanks.

Bought it for my 99 and never installed it. It is not in the cards right now so I am selling it. I would prefer it to be sold to someone local so I wouldn't have to deal with shipping. I am a California resident. It is a QA1 tubular k member with tubular arms. Comes with the UPR/Eibach...

This car doesn't need to be sold but of course for the right price anything is possible. Passed up a couple offers at the last car show but wasn't ready to sell. Both offers came in at 14 grand. I understand the market isn't the best right now but I wouldn't sell for much less then that. Not...

How many of you actually had to use a bump steer kit with your QA1 k members? My car is currently slammed and I have never had to use caster camber plates or anything and the alignment is still dead on. So when I switch to my QA1 I wouldn't think I would need it but just wanted to see who...

Car was running perfectly just cruising down the highway and I downshifted as I was getting off on the exit ramp. Heard a weird noise and then it started running like ass. Got it home pulled the cover off and the coil pack was exploded and the spark plug was just sitting there. Not sure why...

Picked it up brand new for my 99 Cobra. I paid 225.00 for it and its Rio Red as seen in the pic. Its got some scratches on the part that goes into the fender and a couple on the bottom side you can't see. Its a great looking intake and I will let it go for 175.00 shipped. It was only used...

Anyone have a graph or numbers for healthy oxygen sensors on a 4v with long tubes? Trying to do some trouble shooting on why I have such a rough idle. The air to fuel is all over the place. It will be at 17.0 one second idling rough then the next second it will be at 13.0 idling perfect...

What kind of spring rate and length are you all running in the front on your coil over kits?

So I got my new head on and its timing is on. I tried to rotate the crank to slide the rockers back in and "thump" it sounds like is getting stuck on something. Im lost. How hard is it to turn this motor by hand? I don't want to bend anything.

I have done a search a couple times and didn't come up with anything. Anyone has a write up on timing the 99 Cobra? All new chains, tensioners, and guides going on so I need it timed again. Anything will help. Thanks

So the motor is torn down and head was taken into a machine shop and they called me today and said its a good as a brand new one. Well the reason I took it in was because of a squeak that ford said was a bad valve guide. Valve guides checked out fine. The timing chain tensioner was also...

Long story short.....I'm sitting in class right now and I ordered a head for my car a couple days ago and now they need the casting number. Anyone know it off the top of their head? Its a 99 cobra and its the drivers side head. I would use the search but my phone is going slow as balls. Thanks!

It was hard to get pics without the paint reflecting the stuff on the ground around the car. But here's my baby.

Im looking for a sticky of anyone that has pulled their motor with any info or pics of what to do ect.....

My car had a sniper tune put on it about 4 years ago and since the car has been in storage and needs to go through emissions finally, the program is throwing all sorts of flags. I don't have the programmer or know what happened to the guy that did the programing. Is there any way to erase it...

I was curious if all the casting numbers were the same on the 99 Cobra heads? I am trying to order a remanufacted head for mine and I don't have the motor out yet so I was wondering if anyone had some info on this. Anything will help. Thanks~!

Just looking to see what I have cut out for myself. Turns out the squeel my car was making is a bad vavle guide according to Ford. Im not sure how they figured that without pulling the head but when they said 6000 dollars to do the work I said hell no. So it looks like I need to pull the...

I was curious to see if anyone in Cali knew some reliable shops out here. I am finally bringing my car out from MO and it needs some work. And they have to back it up. Any suggestions?

So i was curious if there are any ever meets out here in Cali? The reason I ask its because I am debating bringing my cobra out here from Missouri or if I should just sell it and get something else out here. Car still sits with 47,xxx miles on it. Any opinions? Everyone has one!

Okay well I got it torn down to where the pics are now. I do not see anything that could be broken or messed up. Everyone posted that it was the timing chain tensioner when I posted the vid last time. Here is the vid again so you can hear the noise. Maybe someone can give me an idea what to...