01 cobra eaton swapped orlando

[L1ghtning]

anyone in buy a black 01 eaton swapped cobra around orlando from the auto source??

 

[02SVTV6]

if so I would probably know of it...lot of slow 01s around I will also be sure to do work on it and then post the Vid

 

[L1ghtning]

had built motor, steggy ported eaton, 2.76 upper, t56, putting 480 to the ground. not that slow

 

[02SVTV6]

Slow enough lol...dont let my numbers below fool u

 

[Brutal Metal]

Slow enough lol...dont let my numbers below fool u

OK a stock 01 will put down 290-295, this guy does an Eaton swap and manages to put down 480 RWHP and that's slow? You'll be Damm lucky to get a normal Vortech and Procharger to achieve that figure! Yeah sure it isn't a fricken turbo but that's a NICE power increase!!

 

[02SVTV6]

lets put it this way that eaton swapped 01 on 8psi with a catback would not run 11.6 like i did with my stock block/bottom end 01 with my vortech S trim with a catback and catted mid pipe lol and all my Emissions nonsense full weight...plus on 11 psi I made more then 500 at the wheel and thats with a front mount I/C setup this past spring on a Mustang Dyne...which Im sure that eaton car makes more then 11 psi and still makes 480....and im still on stock exhaust manifolds lol

when I run into it i'll have a video in handy

 

[Jamie R.]

There is a guy up here near atlanta with a eaton swap on a '01 cobra that ran some low 11's, so one of those cars will run when properly driven. If you want details I'm sure he would be more than happy to let you in on what is or was done to the car at when he ran those low 11's and that was on the irs. Take it easy.

Jamie R.
'01 Silver Cobra

 

[Sny714]

OK a stock 01 will put down 290-295

Stock 01's put down a lot less than that. 270-275rwhp is about right.

 

[rich1]

Who has a stock anything these days !:??:

 

[Wishing4Cobra]

lets put it this way that eaton swapped 01 on 8psi with a catback would not run 11.6 like i did with my stock block/bottom end 01 with my vortech S trim with a catback and catted mid pipe lol and all my Emissions nonsense full weight...plus on 11 psi I made more then 500 at the wheel and thats with a front mount I/C setup this past spring on a Mustang Dyne...which Im sure that eaton car makes more then 11 psi and still makes 480....and im still on stock exhaust manifolds lol

when I run into it i'll have a video in handy

Are you saying that specific car would not run into the 11's or are you saying in general all eaton swapped cars wouldnt run 11s on 8psi and just a cb.

 

[L1ghtning]

i was running 15lbs, no cats, o/r x pipe, egr delete, ford racing headers. steggy ported eaton. here are some pics. just wanted to know if anyone on here bought my old car.

here is before eaton swap.... With the procharger system. Didn't really care for that type supercharger. to each their own.

during eaton swap...

I really miss my 01 cobra....

 

[Sny714]

I remember this car being for sale on here. It was a nice car.

 

[Brutal Metal]

i was running 15lbs, no cats, o/r x pipe, egr delete, ford racing headers. steggy ported eaton. here are some pics. just wanted to know if anyone on here bought my old car.

here is before eaton swap.... With the procharger system. Didn't really care for that type supercharger. to each their own.

during eaton swap...

I really miss my 01 cobra....

That's some dedication, Nice Eaton swap as well as Procharger install!:rockon:
Are those 42lb injectors on the Eaton?

 

[M.P. Cobra Fan]

Did this thread really just turn into a my junk is bigger than your junk? Wow.

 

[VirtualSVT]

Best part is that I can find a picture of 02SVTV6's junk on another forum and you can see how small it is....

 

[19mustang95]

how long ago did you sell it/trade it in?

wow, i just checked the website and they want 8,888 for a 94 GT with 136,000 miles and a built 331... that's a little expensive.

 

[L1ghtning]

well i wouldnt call it junk. the car ran great and only had 10000 miles on the new motor. just wanted to know if anyone on here bought her thats all. i still have stuff left over from the car i would give them. sold in the first week of july

 

[02SVTV6]

Best part is that I can find a picture of 02SVTV6's junk on another forum and you can see how small it is....

And I can honestly bet 100$ you wont stand next to me having urs out and others comparing...point of the pic is because its in the mouth...by all means I will show your gf as well :coolman:



What I was saying 480 isn't much power....and HP per boost the Vortech I have makes more hp then the Eaton...reason I was saying Eaton on 8 psi with the same mods I doubt highly it can run 11.6s

 

[02SVTV6]

example my car on 11psi I put down more then 500...let alone 15 on a S trim alone being compared to a ported Eaton

 

[VirtualSVT]

And I can honestly bet 100$ you wont stand next to me having urs out and others comparing...point of the pic is because its in the mouth...by all means I will show your gf as well :coolman:

So you want me to put my **** near yours?

No dice..