03 Cobra FAQ, was: Parts they wont tell us about

[i8u]

Parts they wont tell us about

I just thought it might be a good idea for people to put parts that work and bolt on to the 03 cobra. Please give the part number w/ it.
I heard people have used K$N 0945?
what about a densecharger part number?
Other cold air kits
Exhaust?
pulleys?

What Holley air filter fits?

 

[JB]

this is an excellent idea, i8u.....


Goodyear Gatorback blower belt: PN 4080745 (Goodyear #)

Holley Track Flow air filter: PN HLY-222-1 (Summit Racing #)

 

[Blue03Cobra]

I was just talking to the Sr. Administrator about a '03 FAQ...:-D

I'll make this sticky so everyone can respond with "facts".

Most common modification: Silencer removal (see postban's sig) with "high-flow" filter :-D

 

[mjchip]

Originally posted by Johnny Bravo
this is an excellent idea, i8u.....


Goodyear Gatorback blower belt: PN 4080745 (Goodyear #)

Holley Track Flow air filter: PN HLY-222-1 (Summit Racing #)

That Goodyear Gatorback blower belt, PN 4080745, was for upper L pulley in lieu of stock upper pulley (belt is 1" shorter).

The Gatorback blower belt for stock pulley setup is 4080755.

Mark

 

[JB]

THANKS Mark, my mistake...

I guess the last thing we want is a collection of incorrect info unch:

 

[mjchip]

Originally posted by Johnny Bravo
THANKS Mark, my mistake...

I guess the last thing we want is a collection of incorrect info unch:

No problem dude. It wasn't misinformation, we just needed to add a little to it.

Mark

 

[Cobra'03]

Magnaflow catback 15644

 

[JB]

Dynomax Catback kit: PN 19314 (Dynomax #)

 

[scott]

attn johnny bravo can you verify the holley part number the book shows a 220-1 not a 222-1 help

 

[JB]

that was a Summit Racing part number I posted, and the last section is supposed to be the mfg (Holley) number, however I wasn't able to find it on Holleys website.

here's a link to it at Summit:

http://store.summitracing.com/partdetail.asp?part=27312

 

[scott]

jb is this a cone type filter?

 

[SonicMike]

I can confirm that the Holley 222-1 air filter is correct and works very well.

Mike

 

[scott]

thnks mike, can you tell me the diameter of the filter at the point it mates up to the maf? i think 3.5 inches? maybe? thanks

 

[Snakebitten]

Hey mjchip, what's a Dual EGT Monitor??

 

[JB]

I think he has an Exhaust Gas Temperature probe in each bank of his exhaust system.....

 

[SonicMike]

Originally posted by scott
thnks mike, can you tell me the diameter of the filter at the point it mates up to the maf? i think 3.5 inches? maybe? thanks

The diameter of the opening of the filter at that point is 4.5 (actually more like 4 and 7/16) inches.

Mike

 

[mjchip]

Originally posted by Johnny Bravo
I think he has an Exhaust Gas Temperature probe in each bank of his exhaust system.....

Yes, that's correct.

Mark

 

[SVTyballz]

Full length subframe connectors

http://www.maximummotorsports.com/sfc.html

part number: MMFL-3PC

yes they fit the 03


gary

 

[2k3biz]

Hey mjchip.

How do you have your EGT monitoring set up? i'm looking at getting Autotap and Mafterburner to data log my Cobra for a while prior to modding. I would like to monitor EGT, but i'm not sure what it would take? do you need extra sensors/probes, or can autotap or mafterburner monitor that without having to add anything extra??

Thanks.

 

[mjchip]

Originally posted by 2k3biz
Hey mjchip.

How do you have your EGT monitoring set up? i'm looking at getting Autotap and Mafterburner to data log my Cobra for a while prior to modding. I would like to monitor EGT, but i'm not sure what it would take? do you need extra sensors/probes, or can autotap or mafterburner monitor that without having to add anything extra??

Thanks.

I have the EGT probes in my x-pipe right behind the manifold collectors so that they are pretty close to the #4 and #8 cylinders. This is NOT ideal though. Ideally you want to place these about 1-1.5" from the main flange (close to the cylinder exhaust port).

I use dual Computech probes but any Type-K thermocouple will work. I also use a Computech digital EGT meter with peak hold but plan on installing two EGT gauges, with peak-hold functions either in my engine compartment or in the glove box for tuning.

Mark