03 TR 10th Anniversary 16k mile Cobra. TF wheels
SOLD!!!!!
Honestly im not sure what i am doing. i have been back and forth on possibly selling the car. i barely drive the car, and i almost get a guilty feeling driving it with such low miles. lol. i bought the car with 15,293 miles on it feburary 2011, it now has 16,6xx on it. i purchased a c6 vette last month, then my harley powerstroke got totaled 2 weeks ago. With the vette the cobra will see even less usage now. i had plans to build the cobra with kb 2.2 and fuel system, but have held off and the kb has become my kitchen table center piece. i have really thought about selling it and buying a already built cobra with some avg miles that i wont mind driving and enjoying more. Or just banking the money as it is alot of money to just sit in the garage.
This car was previously owned by Turkish, and VelociTT so you can follow most of the cars previous owners on this site. Two great guys that took amazing care of the car.
Owner-Andrew Dunlap
Phone #- 330-432-5912 call or text
Location- Mechanicstown, oh 44651
***ONLY issue with the car is sometimes the shift light will randomly start flashing
Quick details
16,6xx miles
NO dents, dings, or deep scratches.
Car put down 506/521rw on dyno at street lethal in pa
have all stock parts, except stock manifolds
stock hood and wing (Perfect paint)are bubble wrapped up from auto body shop
stock 10th wheels have like new tires, one rear wheel has some curb rash
MODS-
Original motor rebuilt built by Tim Rodeheaver using all OEM hardware @~13,800 miles
Motor bored 0.020 over with Diamond Racing -15cc dished pistons
Dyno tuned by Street Lethal Performance (506rwhp/521rwtq)
Stiegemeier Stage IV Ported/Painted Blower
Riechard Racing 2.80 aluminum non-slip upper S/C pulley
BilletFlow IRS Differential Brace (Blue)
Accufab S/C Plenum
Kenne Bell /Accufab “Big Oval” Throttle Body
Kenne Bell boost-a-pump
DiabloSport MAFia
SCT handheld
60# Ford Racing injectors
160* Thermostat
LFP C&L Tru-Flow Intake Tube
LFP 10” Power Stack Filter & adapter
LFP 4lb. Lower Pulley
LFP 3.2 Alternator Pulley
LFP Intercooler Reservoir
LFP Radiator Reservoir
LFP Dual Pass Heat Exchanger
LFP Head cooling mod
MAC Ceramic Coated Long Tubes
Lethal Performance Catted X pipe
Borla Stinger Cat-Back (semi polished)
MGW Billet Shifter w/ Tri-Axe handle
Ford GT Cam Covers
Ford GT Coil Covers
BilletFlow 4 piece Idler Pullies (silver)
MM Full Length Subframe Connectors
Hawk HPS brake pads front and rear
18x9/18x10.5 3 piece True Forged Mach 5 wheels (satin black w/ polished lip, front has big brake cut for a small lip, the rear has the largest lip available for the width)
Powdercoated & engraved caps (satin black w/ cobra emblem)
265/35/18 Nitto 555 (front)
305/35/18 Nitto 555RII (rear)
17” 10th Anniversary Wheels
235/45/17 Falken FK452 (front)
275/40/17 Mickey Thompson ET Street Radials (rear)
UPR quick click firewall adjuster
Clutch quadrant
TR6 Plugs
EGR delete
Transmission fluid change with GM Syncromesh (10/1/2008)
PPRV Delete
You will notice the motor was rebuilt per the previous owner Bo Hess. Here is the explanation Bo had in his for sale thread.
The one “issue” that some of you might notice is that the car has a rebuilt motor at such low mileage. The car developed some smoke after I had the long tube headers installed and the car retuned @ 13,250 miles or so. To cut a long winded story of problem chasing short, the car had detonation under WOT and developed some smoking/oil consumption. Neither I nor the car guys I know had ever suspected that it would have had detonation on the pistons to the degree it did. The heads are in great shape and did not suffer any damage. The smoking/consumption problem was the direct result of the detonation, and while the block was barely within tolerance, my engine builder Tim Rodeheaver had recommended we get the motor bored 0.020 over and new pistons for an essentially ‘fresh’ motor. All Ford OEM parts were used in the rebuild, aside from the upgrading to the Diamond Racing pistons over the weak factory pistons.
Asking $26,000 i do not need to sell, save your offers tire kickers.
$24,000 obo without the TF wheels
possible trades....? trades would need to come to me tho
There is a lein on the car, but it is through a local bank (10 miles away) and can have the title the same day car is paid off.
im not much of a picture taker.... some are cell pics, other just basic camera pics, besides some of the more professional ones Bo took.
car with stock hood and wing
Please do not fill my for sale thread up with negative comments from the stock hood and wing nut-huggers. THERE WAS NO BLENDING OF THE PAINT WHEN THE COWL HOOD AND SALEEN WING WERE DONE. It is my car and i modded it how i wanted, the stock can be easily bolted back on. There is 2 other cars that looked identical to mine stock that has TF mach 5 wheels ect. I cant stand when someone has the exact same car i like mine to stand out.
SOLD!!!!!
Honestly im not sure what i am doing. i have been back and forth on possibly selling the car. i barely drive the car, and i almost get a guilty feeling driving it with such low miles. lol. i bought the car with 15,293 miles on it feburary 2011, it now has 16,6xx on it. i purchased a c6 vette last month, then my harley powerstroke got totaled 2 weeks ago. With the vette the cobra will see even less usage now. i had plans to build the cobra with kb 2.2 and fuel system, but have held off and the kb has become my kitchen table center piece. i have really thought about selling it and buying a already built cobra with some avg miles that i wont mind driving and enjoying more. Or just banking the money as it is alot of money to just sit in the garage.
This car was previously owned by Turkish, and VelociTT so you can follow most of the cars previous owners on this site. Two great guys that took amazing care of the car.
Owner-Andrew Dunlap
Phone #- 330-432-5912 call or text
Location- Mechanicstown, oh 44651
***ONLY issue with the car is sometimes the shift light will randomly start flashing
Quick details
16,6xx miles
NO dents, dings, or deep scratches.
Car put down 506/521rw on dyno at street lethal in pa
have all stock parts, except stock manifolds
stock hood and wing (Perfect paint)are bubble wrapped up from auto body shop
stock 10th wheels have like new tires, one rear wheel has some curb rash
MODS-
Original motor rebuilt built by Tim Rodeheaver using all OEM hardware @~13,800 miles
Motor bored 0.020 over with Diamond Racing -15cc dished pistons
Dyno tuned by Street Lethal Performance (506rwhp/521rwtq)
Stiegemeier Stage IV Ported/Painted Blower
Riechard Racing 2.80 aluminum non-slip upper S/C pulley
BilletFlow IRS Differential Brace (Blue)
Accufab S/C Plenum
Kenne Bell /Accufab “Big Oval” Throttle Body
Kenne Bell boost-a-pump
DiabloSport MAFia
SCT handheld
60# Ford Racing injectors
160* Thermostat
LFP C&L Tru-Flow Intake Tube
LFP 10” Power Stack Filter & adapter
LFP 4lb. Lower Pulley
LFP 3.2 Alternator Pulley
LFP Intercooler Reservoir
LFP Radiator Reservoir
LFP Dual Pass Heat Exchanger
LFP Head cooling mod
MAC Ceramic Coated Long Tubes
Lethal Performance Catted X pipe
Borla Stinger Cat-Back (semi polished)
MGW Billet Shifter w/ Tri-Axe handle
Ford GT Cam Covers
Ford GT Coil Covers
BilletFlow 4 piece Idler Pullies (silver)
MM Full Length Subframe Connectors
Hawk HPS brake pads front and rear
18x9/18x10.5 3 piece True Forged Mach 5 wheels (satin black w/ polished lip, front has big brake cut for a small lip, the rear has the largest lip available for the width)
Powdercoated & engraved caps (satin black w/ cobra emblem)
265/35/18 Nitto 555 (front)
305/35/18 Nitto 555RII (rear)
17” 10th Anniversary Wheels
235/45/17 Falken FK452 (front)
275/40/17 Mickey Thompson ET Street Radials (rear)
UPR quick click firewall adjuster
Clutch quadrant
TR6 Plugs
EGR delete
Transmission fluid change with GM Syncromesh (10/1/2008)
PPRV Delete
You will notice the motor was rebuilt per the previous owner Bo Hess. Here is the explanation Bo had in his for sale thread.
The one “issue” that some of you might notice is that the car has a rebuilt motor at such low mileage. The car developed some smoke after I had the long tube headers installed and the car retuned @ 13,250 miles or so. To cut a long winded story of problem chasing short, the car had detonation under WOT and developed some smoking/oil consumption. Neither I nor the car guys I know had ever suspected that it would have had detonation on the pistons to the degree it did. The heads are in great shape and did not suffer any damage. The smoking/consumption problem was the direct result of the detonation, and while the block was barely within tolerance, my engine builder Tim Rodeheaver had recommended we get the motor bored 0.020 over and new pistons for an essentially ‘fresh’ motor. All Ford OEM parts were used in the rebuild, aside from the upgrading to the Diamond Racing pistons over the weak factory pistons.
Asking $26,000 i do not need to sell, save your offers tire kickers.
$24,000 obo without the TF wheels
possible trades....? trades would need to come to me tho
There is a lein on the car, but it is through a local bank (10 miles away) and can have the title the same day car is paid off.
im not much of a picture taker.... some are cell pics, other just basic camera pics, besides some of the more professional ones Bo took.
car with stock hood and wing
Please do not fill my for sale thread up with negative comments from the stock hood and wing nut-huggers. THERE WAS NO BLENDING OF THE PAINT WHEN THE COWL HOOD AND SALEEN WING WERE DONE. It is my car and i modded it how i wanted, the stock can be easily bolted back on. There is 2 other cars that looked identical to mine stock that has TF mach 5 wheels ect. I cant stand when someone has the exact same car i like mine to stand out.
Last edited: