12v switched source on driver side fuse box

[Tim99GT]

Anyone know what open spot is a switched 12v? My tester doesn't seem to work and all I need to do is plug my a/f gauges power wire into the switched 12v spot. I already have the add a fuse and all. Just wanted to know if anyone knows a spot off of the top of their head before I have to go get another tester.
Thanks :beer:

 

[Bdubbs]

I believe slot #5 is.

 

[Tim99GT]

Well I tried slot 5 and nothing :/
Maybe my ground is fault or not as good as it needs to be?
I'm shutting it down or the night an will resume in the morning

 

[Real2000CobraR]

Slot 5. Do you have 2 fuses in your add a fuse? If not that could be your issue.

 

[Tim99GT]

I have a add a fuse with one 3A fuse in it. I plugged it into slot 5, turned the key on and nothing :/

 

[Real2000CobraR]

You need to fill both fuse spots in the add a fuse.

 

[Real2000CobraR]

Do you have both slots filled like this. (Just use whatever fuses you feel appropriate)

 

[Tim99GT]

I'll add a 2nd fuse and see if that works

 

[MrCaliKrome]

I used an ad a fuse in the #5 slot without adding in the extra fuse and my AEM UEGO failsafe wideband worked but my instrument cluster has a slight delay to activate and also a side benefit is the traction control is defeated full time.

however I am going go add the extra fuse so everything works normal.

 

[Tim99GT]

Why does the add a fuse require two fuses? Just curious and for my info

 

[MrCaliKrome]

Also, here is a link I found helpful with a map of the fusebox.

http://www.svtperformance.com/forums/how-230/591729-lc1-wide-band-gauge-install-tips-w-pics.html

 

[Real2000CobraR]

Why does the add a fuse require two fuses? Just curious and for my info

One is to "replace" the fuse slot you are using and the other is for your added circuit.

 

[Real2000CobraR]

Add another fuse and you should be fine.

 

[Tim99GT]

Ahh I see. That makes sense. I'll go add one and see if it works. Brb

 

[Tim99GT]

Got it!! Thank guys!

 

[Real2000CobraR]

Awesome man. Enjoy

 

[Tractionless1]

Can you run power to multiple accessories out of slot #5? I need power for N20 gauge, N20 lean module, E85 level meter, etc.