So I’m installing my 1320 tvs on my 2010 and the egr can’t bolt up due to the cut and weld on the blower. So guys running this setup what’s the fix? Or just delete the egr tube and run the sensor?
. After some serious man handling due to the tube being too long, I decided to take the time and bend to where it was oriented correctly.... still too long but cut and had it rewelded.. perfect fit. Rewrapped in 1" header wrap so not to burn the coolant hoses. The trigger to go this route was the tube was rubbing on the firewall which not only rubbed the fire retardant wrap to a million pieces, but also caused a bunch of squeaking heard inside the car.So I’m installing my 1320 tvs on my 2010 and the egr can’t bolt up due to the cut and weld on the blower. So guys running this setup what’s the fix? Or just delete the egr tube and run the sensor?
Try to manipulate into place because it looks closer than what mine was. Bottom line, egr delete costs gas mileageThis is what I’m working with here
It kind of look wired from the picture (maybe just the angle of the picture) but can you even bolt the EGR valve to the S/C in the first place without the tube?This is what I’m working with here
You know I didn't even look at the photo, but Poisonous is right. I don't think you can physically bolt up the EGR. Here's how 1320Junkie had mine set up.It kind of look wired from the picture (maybe just the angle of the picture) but can you even bolt the EGR valve to the S/C in the first place without the tube?
I just looked closer at this and I don't know how you bolt this up? There is suppose to be a block to bolt the egr. In this case, the egr top looks like it won't bolt up. Did you ask Jason??This is what I’m working with here
Here's a good how to if you haven't found it yet.Yeah I talk to Jason last night, he told me this is one of his protypes and it didn’t have the block on there, so I’d have to weld one on or delete my egr. So I’m deleting my egr. Now I just need to figure out how to properly run the vacuum lines for the sip sensor on this thing
That would be great!I can take picture tomorrow night of my car. It’s a gen 3 but same routing.
We’re you ever able to take a picture of the routing ?That would be great!
We’re you able to take a picture of the routing?I can take picture tomorrow night of my car. It’s a gen 3 but same routing.