leecar83
New Member
Might be interested. Can you PM me details?Selling my procharger setup since I just bought gen 5 3.0 whipple this wk
Might be interested. Can you PM me details?Selling my procharger setup since I just bought gen 5 3.0 whipple this wk
Great info I will start looking for a 3 bolt front cover and a blower kit...The 3 bolt tensioner layout provides more efficient leverage for the tensioner on the belt. If you’re looking at 15psi or more and the motor is out of definitely consider it. Local mustang shop said that’s what they recommend and that they also drill and tap the tensioner mounts for one size bigger bolts
Pm sentMight be interested. Can you PM me details?
Hmm. My tensioner is definitely single bolt.i think i saw one recently in the mach 1 registry group on FB. if you have the single bolt tensioner then it should all be the same. If I remember i'll try to look for it later
I'll have a 3 bolt cover and vortech v1 t trim coming off my car soon if your interested.Still looking. I can't believe how hard it is to find one of these.
I'm not fully up to speed on vortech trim differences but I'm thinking the t trim might be a bit much for a stock bottom end?I'll have a 3 bolt cover and vortech v1 t trim coming off my car soon if your interested.
Sent from my Pixel 7 using Tapatalk
I ran it on a stock bottom end in a 96 cobra and it was fine, still hasn't had an issue. It's all in the tune and making sure they don't put a ridiculous amount of timing in it.I'm not fully up to speed on vortech trim differences but I'm thinking the t trim might be a bit much for a stock bottom end?
Shoot me over the details and pictures when possible. Thank youI ran it on a stock bottom end in a 96 cobra and it was fine, still hasn't had an issue. It's all in the tune and making sure they don't put a ridiculous amount of timing in it.
Made a little over 500hp at the wheel and 440tq on a 3.33 pulley and about 12lbs of boost.
Still looking...
Single boltWhat timing cover do you have? Single bolt or 3 bolt tensioner?
I have a P1sc procharger kit with 3.4 pulley, A/A intercooler with piping, tial q50 bov, pro-m maf , green top 42lb injectors. - used
Set up is on a 2002 Gt but should work with 4v single bolt tensioner timing cover.
Sent from my iPhone using the svtperformance.com mobile app
I have a 3 bolt cover for sale. Those single bolt covers really aren't good for the vortech setups especially when you use a good tensioner like thump racingSingle bolt
Single bolt
Can you send me some pictures? I think there will be quite a few 4v specific parts though. Discharge, coolant crossover, ect.If you’re interested in the kit I’m asking $3,500 obo I’m located in Northwest Arkansas.
I can ship on your dime.
Sent from my iPhone using the svtperformance.com mobile app
Can you send me some pictures? I think there will be quite a few 4v specific parts though. Discharge, coolant crossover, ect.
Can you send me some pictures? I think there will be quite a few 4v specific parts though. Discharge, coolant crossover, ect.
My Lincoln Town Car needs this.View attachment 1839486
One with the bumper off to see the A/A intercooler
Sent from my iPhone using the svtperformance.com mobile app