2001 lightning supercharger on a terminator

[mayer65]

Have the opportunity to pick one up practically free. It has a stage 4 port and 2.8 pulley on it.

Will it fit on my terminator and if so any special parts or misfits involved that would require additional work?

I search and will continue searching but running out of time before someone else snags this.

Thanks y'all

 

[SCMOKN]

Don't think it would fit without mods. Not worth it!

 

[stal94gt]

Wont fit the lower bolt holes are diff. Not to mention the inatke goes over the top of the blower so it would sit way high

 

[mayer65]

Thanks y'all gonna let it pass. There are a few needed mods ad it can be done but for the time and money I might as well get the right one.

 

[Ironhand]

Not only does the inlet wrap over the blower itself. The blowers are basically the same, so port the eaton you have. Also, the Lightnings use a mid-plate that bolt down to the lower intake and the blower bolts down on the mid-plate. The mid-plate is designed to fit the deck height of a 5.4 2 Valve.

Could it be made to work? Yes.

How? With alot of modification that is no where near any type of gain. Not to mention it probably wont clear your stock hood.

Conclusion. Port an existing Cobra Eaton. Bolt it down, call it a day, grab a beer.

 

[testorossa1989]

Anything can be modified to work. Its a good chance that you will be paying more to get the dang thing working then if you would just port a termi eaton.

 

[gat0r]

def. wouldnt be worth it & looks like @ss hanging out the hood like it does