2003 6 Speed Manual Lightning (56K Warning! Lots of Pics)

Scotts Elle

Yup. Still don't care.
Established Member
Joined
Jul 17, 2005
Messages
975
Location
Texas
Asking 22,000 the way it sits. 39,xxx miles. Offers welcome.

Engine:
.020 over CP pistons
Ford racing steel crank
Oliver billet racing rods
Moroso 7qt Oilpan
Ford racing High flow oil pump
Built by VT Engines (and WMS)
LFP Stage 2 heads
ARP hardware
Comp cams adjustable cam gears
Comp cam stage 1 cams
Whipple 2.3
4lb metco quick change pulley
Seimens Deka 60lb Injectors
Fluidyne Heat exchanger
JLP Intercooler tank
Dual Walbro 255lph fuel pumps
SCT BA2600 MAF
SCT Xcal2 tuned by WMS

Exhaust
Magnaflow exhaust
Stock manifolds and cats (didn't upgrade because I didn't want it loud)

Trans
New Ford racing T-56 6 speed manual (2000 Cobra R spec)
26 spline hardened input shaft by Liberty Gears
B&M custom short shifter (shifts like a stock mustang)
Centerforce DFX clutch
Viper internal slave cylinder and t/o bearing
Viper front trans cover
Braided clutch line
Viper slave cylinder

Brakes
Wilwood 16" front 2 piece rotors
Wilwood 6 piston racing cailpers
Wilwood BP20 pads
braided brake lines
Wilwood 15 3/4" rear 2 piece rotors
Wilwood 4 piston racing calipers
Wilwood BP20 pads
Complete braided flex lines (all rubber lines removed)

Suspension
Front:
DJM upper and lower control arms
Stock springs
QA1 12 way adjustable shocks
urethane bushings
Hellwig Sway bar
Energy Suspension sway bar end links

Rear
KP Components 4 link modified for coilvers
QA1 12 way adjustable coilovers w/ 12-300 spings (12-600) are also included.
KP Components panhard bar
Hellwig Sway bar
Energy suspension endlinks
Energy suspension urethane bushings
***Complete suspension hight is adjustable from stock to slammed.***

Wheels/Tires
Asanti AF135 22x9.5 3 piece forged wheels
Perrelli Scorpion Asemetric 285/30/R22
Gorilla lugs w/ key

Exterior
Sir Micheals smoothed roll pan
Gaylords Speedster bed cover
Carriage works upper and lower billet grills powdercoated black

Interior
Has Canadian speedo (Show KPH and MPH and mileage is shown in KM's)
Expedition center console (Custom upholstered and fabbed for 6 speed)
Custom upholstered seats
Black carpet (needs to be replaced... was cut incorrectly)
Clarion Double DIN DVD, CD, iPOD, HDD NAV
Boston Accoustic SPX60 6.5" mid and 1" tweeter in doors w/ cross over
Boston Accoustis GT10 woofer in custom glasses box
2 Boston accoustic amps in custom built amp racks behind seat. (Seats still go all the way back).
2 layers of Ramm mat sound deader
1 layer of sound suspression on floor
Bedrug

Another kid on the way and have some bills that need to be taken care of. My son is of the age where he really wants to build a car with me. We are looking at kit cars. All this is only possible if the truck goes... :smt089

Pics! Sorry the engine bay is dirty.
v8ys1pu73x.jpg

j9g2ynp5u2.jpg

9vxv1kiq5i.jpg

kil6d3u5t0.jpg

la6bi0p7a5.jpg

95kq8jcben.jpg

i245eab9fj.jpg

j46elc621n.jpg

yr6767fk1q.jpg

al4jhbqa72.jpg

ummix6qeod.jpg

qgsuzego9n.jpg

83uc5vpzr0.jpg

t2nq13vlg6.jpg

trg36dqg1x.jpg

12lfo7fn79.jpg

al3nld2lrm.jpg

tq1bsj1dm3.jpg

3n4n1rh0gi.jpg

vm63fy5b5p.jpg

9kvc0leg1f.jpg

qccou5nsd0.jpg

r4l93eeex2.jpg
 

Scotts Elle

Yup. Still don't care.
Established Member
Joined
Jul 17, 2005
Messages
975
Location
Texas
What kind of power is it making through the six speed?

JJ at Woodbine estimates 580 to 600. I never had it dyno'ed. This was a weekend pleasure truck. I had it at the track a few times but never with the manual trans or new motor. JJ verified my datalogs and says everything is safe. I have had a few WOT runs on the freeway and no weird noises.


Thanks for the compliments.
 

Scotts Elle

Yup. Still don't care.
Established Member
Joined
Jul 17, 2005
Messages
975
Location
Texas
Thanks guys.

I'd consider 10K and a 01 bullit stang... I've always wanted one of those.
 

DMassey

No Habla Jibber Jabber
Established Member
Joined
Feb 16, 2005
Messages
1,920
Location
Boone Co, WV
how did you like that Stage 1 cam... any kind of peaky powerband, or did it keep/improve on the low end power? One of my best friends hooked me up with some Stage 1 Comp Cams for my daily driver L and I haven't installed them yet. I hope they produce good torque, I'm not looking to gain a higher rpm range.
 

NoAllies

Boost-A-Holic
Established Member
Joined
Jun 29, 2009
Messages
198
Location
Anchorage, AK
Bump for you. I like the truck but do not like the multi color scheme between valve covers, the whipple, and the seat trim. G/L with the sale.
 

Scotts Elle

Yup. Still don't care.
Established Member
Joined
Jul 17, 2005
Messages
975
Location
Texas
Agreed actually. The truck was not finished. I was going to change the color of the blower and cam covers to red. The interior was also going to get a few more red accents. Just ran out of time.

Truck is pending.
 
Last edited:

94venomV8

Active Member
Established Member
Joined
Mar 18, 2006
Messages
2,702
Location
Iowa
Just wondering is it hard to reach the shifter from the seat or is it comfortable? If the blower and covers were red or black This would be one of the best lightings I have ever seen. Would you take a 98 Kenne Belled Cobra, with built trans, rearend and alot of extras plus cash for trade?
 

Users who are viewing this thread



Top