Asking 22,000 the way it sits. 39,xxx miles. Offers welcome.
Engine:
.020 over CP pistons
Ford racing steel crank
Oliver billet racing rods
Moroso 7qt Oilpan
Ford racing High flow oil pump
Built by VT Engines (and WMS)
LFP Stage 2 heads
ARP hardware
Comp cams adjustable cam gears
Comp cam stage 1 cams
Whipple 2.3
4lb metco quick change pulley
Seimens Deka 60lb Injectors
Fluidyne Heat exchanger
JLP Intercooler tank
Dual Walbro 255lph fuel pumps
SCT BA2600 MAF
SCT Xcal2 tuned by WMS
Exhaust
Magnaflow exhaust
Stock manifolds and cats (didn't upgrade because I didn't want it loud)
Trans
New Ford racing T-56 6 speed manual (2000 Cobra R spec)
26 spline hardened input shaft by Liberty Gears
B&M custom short shifter (shifts like a stock mustang)
Centerforce DFX clutch
Viper internal slave cylinder and t/o bearing
Viper front trans cover
Braided clutch line
Viper slave cylinder
Brakes
Wilwood 16" front 2 piece rotors
Wilwood 6 piston racing cailpers
Wilwood BP20 pads
braided brake lines
Wilwood 15 3/4" rear 2 piece rotors
Wilwood 4 piston racing calipers
Wilwood BP20 pads
Complete braided flex lines (all rubber lines removed)
Suspension
Front:
DJM upper and lower control arms
Stock springs
QA1 12 way adjustable shocks
urethane bushings
Hellwig Sway bar
Energy Suspension sway bar end links
Rear
KP Components 4 link modified for coilvers
QA1 12 way adjustable coilovers w/ 12-300 spings (12-600) are also included.
KP Components panhard bar
Hellwig Sway bar
Energy suspension endlinks
Energy suspension urethane bushings
***Complete suspension hight is adjustable from stock to slammed.***
Wheels/Tires
Asanti AF135 22x9.5 3 piece forged wheels
Perrelli Scorpion Asemetric 285/30/R22
Gorilla lugs w/ key
Exterior
Sir Micheals smoothed roll pan
Gaylords Speedster bed cover
Carriage works upper and lower billet grills powdercoated black
Interior
Has Canadian speedo (Show KPH and MPH and mileage is shown in KM's)
Expedition center console (Custom upholstered and fabbed for 6 speed)
Custom upholstered seats
Black carpet (needs to be replaced... was cut incorrectly)
Clarion Double DIN DVD, CD, iPOD, HDD NAV
Boston Accoustic SPX60 6.5" mid and 1" tweeter in doors w/ cross over
Boston Accoustis GT10 woofer in custom glasses box
2 Boston accoustic amps in custom built amp racks behind seat. (Seats still go all the way back).
2 layers of Ramm mat sound deader
1 layer of sound suspression on floor
Bedrug
Another kid on the way and have some bills that need to be taken care of. My son is of the age where he really wants to build a car with me. We are looking at kit cars. All this is only possible if the truck goes... :smt089
Pics! Sorry the engine bay is dirty.
Engine:
.020 over CP pistons
Ford racing steel crank
Oliver billet racing rods
Moroso 7qt Oilpan
Ford racing High flow oil pump
Built by VT Engines (and WMS)
LFP Stage 2 heads
ARP hardware
Comp cams adjustable cam gears
Comp cam stage 1 cams
Whipple 2.3
4lb metco quick change pulley
Seimens Deka 60lb Injectors
Fluidyne Heat exchanger
JLP Intercooler tank
Dual Walbro 255lph fuel pumps
SCT BA2600 MAF
SCT Xcal2 tuned by WMS
Exhaust
Magnaflow exhaust
Stock manifolds and cats (didn't upgrade because I didn't want it loud)
Trans
New Ford racing T-56 6 speed manual (2000 Cobra R spec)
26 spline hardened input shaft by Liberty Gears
B&M custom short shifter (shifts like a stock mustang)
Centerforce DFX clutch
Viper internal slave cylinder and t/o bearing
Viper front trans cover
Braided clutch line
Viper slave cylinder
Brakes
Wilwood 16" front 2 piece rotors
Wilwood 6 piston racing cailpers
Wilwood BP20 pads
braided brake lines
Wilwood 15 3/4" rear 2 piece rotors
Wilwood 4 piston racing calipers
Wilwood BP20 pads
Complete braided flex lines (all rubber lines removed)
Suspension
Front:
DJM upper and lower control arms
Stock springs
QA1 12 way adjustable shocks
urethane bushings
Hellwig Sway bar
Energy Suspension sway bar end links
Rear
KP Components 4 link modified for coilvers
QA1 12 way adjustable coilovers w/ 12-300 spings (12-600) are also included.
KP Components panhard bar
Hellwig Sway bar
Energy suspension endlinks
Energy suspension urethane bushings
***Complete suspension hight is adjustable from stock to slammed.***
Wheels/Tires
Asanti AF135 22x9.5 3 piece forged wheels
Perrelli Scorpion Asemetric 285/30/R22
Gorilla lugs w/ key
Exterior
Sir Micheals smoothed roll pan
Gaylords Speedster bed cover
Carriage works upper and lower billet grills powdercoated black
Interior
Has Canadian speedo (Show KPH and MPH and mileage is shown in KM's)
Expedition center console (Custom upholstered and fabbed for 6 speed)
Custom upholstered seats
Black carpet (needs to be replaced... was cut incorrectly)
Clarion Double DIN DVD, CD, iPOD, HDD NAV
Boston Accoustic SPX60 6.5" mid and 1" tweeter in doors w/ cross over
Boston Accoustis GT10 woofer in custom glasses box
2 Boston accoustic amps in custom built amp racks behind seat. (Seats still go all the way back).
2 layers of Ramm mat sound deader
1 layer of sound suspression on floor
Bedrug
Another kid on the way and have some bills that need to be taken care of. My son is of the age where he really wants to build a car with me. We are looking at kit cars. All this is only possible if the truck goes... :smt089
Pics! Sorry the engine bay is dirty.