No Trades
Fully built Teksid Block
Twin Precision 62mm Turbos
Sullivan Intake
T-56 6 speed Transmission
Return style fuel system with Dual Walbro 485s for E85
Teksid block, 30 over built by Al Papitto
Stock turned crank
Manley H beam rods
CP Pistons (.21 top ring gap)
3 valve oil pump
All ARP hardware including head studs
Heads have new bronze valve guides with new seals by Kris Sterns
Sullivan upper and lower intake
ported stock TB
Sullivan fuel rails
Ford Motorsport 60lb injectors
Division X return fuel system with twin Walbro 485 pumps brand new for E85
THP full twin turbo kit
Precision 6262 Turbos
External WG's
1300HP FMIC Intercooler
HPX Mass air flow sensor
QA1 tubular K member
QA1 tubular A arms
QA1 175# 14" coil over kit
H&R SS rear springs
Magnaflow catback
New BFGoodrich g-force sport comp-2
New 315/35/17 rear Mickey Thompson ET street S/S
10.5 AFS rear replica rims
Eboost 2 Boost gauge and controller
Aem wideband
battery relocated in the trunk
Spec 3+ clutch
Fiore firewall adjuster and quadrant
MGW shifter
Car is a straight sleeper. When the turbos spool up hang on.
Car has 91k miles on the body. Mods have about 35-40k. Car has a few scratches and a couple minor dings but still looks great and is super clean.
Car runs great. It’s scary fast.
It made 842RWHP @19psi.
On E-85 it would be around 1000hp.
It’s ready for E85 but it would need bigger injectors which I have ID1300s brand new ready to install. Put the injectors in it and tune it. That’s it. Then crank up the boost. The Walbro 485s are brand new, new sending unit, and new micron fuel filter for E85.
Injectors only come with the car at the asking price. These are $2000.00 injectors brand new.
Link to More Pictures:
https://imageshack.com/a/exRl/1
304-228-4732
No trades.
Price is $24000 with the ID1300's. $22500 without.
Located in Mount Hope WV 25880.
Feel free to come inspect the car or call me about it with questions.
I just had a compression test done on the car so I can give all those exact numbers to any interested buyer. Cylinders were all 160's-170s psi done by ford dealer.
This car is an animal.
Thanks