2006 GT Champ Car Build

kevinatfms

Ex-Ford/Kia/Hyundai Tech
Established Member
Premium Member
Joined
Jan 29, 2006
Messages
4,990
Location
Maryland
Got the deal of a lifetime on a 2006 Mustang GT in Satin Silver. High mileage on the chassis(170k+)but fresh engine in it. Picking it up tomorrow. Originally a Georgia car so rust should be at an absolute minimum.
DENB1401.JPG

VCNN4772.JPG


as some know, I run a team in the Champ Car Endurance Racing Series. We currently run a 2002 Hyundai Elantra in Class B(1.92L - 2.4L engine size) and have been somewhat successful at Class podiums with 1 win at the 12 hrs of VIR South in 2022. We have been itching to get faster and into a better platform for the last few months. This car will replace the Hyundai and move us from Class B into Class D(3.92L and higher).

Plan is to get the car to the storage location for now. Assess what it needs prior to going off to get caged.

Car starts at a VPI(Vehicle Performance Index) of 530 points. Every 10 points over 500 gets you a -1 penalty lap assessed at the start of the race. Plan is to keep it under 750 points total to give us a competitive chance.

Points Upgrades(110 points added total):
Engine Mounts - 10
Caster/Camber Top Hats - 20
Billet IMRC Deletes - 25
3.5" Aluminum Driveshaft - 10
Torsen T2R - 25
Adjustable Panhard Bar - 10
Front Sway Bar - 20

Points Free:
Dampers - Bilstein? Steeda Pro Action?
Springs - Steeda Competition or Sports
4 Piston Front Brembos + 14" Rotors - Powerstop Kit(GT500 take offs)
EPAS Conversion(reduce overheating power steering)
Short Throw Shifter
90mm MAF w/ intake
Catalyst delete + Axle back
18x9 or 18x9.5 or 18x10 + 275/40R18 RS4s(2 sets)

This puts us at 650 VPI total which would put us 12 laps down on the field to start the beginning of a race.

This is my second S197 car and i look forward to building this over the next 6-8 months to get ready for March of 2025 at 12hrs of VIR South as its debut.

Plans are to mimic the FR500C cars from the mid 2000's which i loved. Something like this:
FR500.jpg
FR5002.jpg


and a picture of my old S197 HPDE car:
IMG_3015.JPG
 
Last edited:

Recon

Well-Known Member
Established Member
Joined
Jul 23, 2016
Messages
3,484
Location
In the 427R
What about Maximum Motorsports on some of the suspension upgrades?


Sent from somewhere in the twilight zone…
 

kevinatfms

Ex-Ford/Kia/Hyundai Tech
Established Member
Premium Member
Joined
Jan 29, 2006
Messages
4,990
Location
Maryland
What about Maximum Motorsports on some of the suspension upgrades?


Sent from somewhere in the twilight zone…
Will more than likely be using the caster/camber plates from MM.

The other items we will need to see how our VPI stacks up and how many penalty laps we can go down before we are fully out of contention. Going over 1000VPI puts us into EC class(exception class) which cannot compete for any class wins or the overall win.
 
Last edited:

kevinatfms

Ex-Ford/Kia/Hyundai Tech
Established Member
Premium Member
Joined
Jan 29, 2006
Messages
4,990
Location
Maryland
Looking for some take off parts if anyone has any:
1. OE trunk lid w/o spoiler - Satin Silver preferred or any color, can trade winged trunk lid
2. OE front inner fender liners
3. OE front turn signal lights
4. OE GT/GT500 mufflers
5. OE over axle pipes
6. OE exhaust manifolds
7. OE 07-09 GT500 wheels 18x9.5 - shape doesnt matter, using them for racing
 
Last edited:

kevinatfms

Ex-Ford/Kia/Hyundai Tech
Established Member
Premium Member
Joined
Jan 29, 2006
Messages
4,990
Location
Maryland
Starting to order some parts:
AMR 18x9 +30 wheels
275/40R18 NT05's
Steeda Pro Action Shocks
Steeda Sport Springs
Steeda Camber Plates
C&L Adjustable Panhard Bar
SVE Braided Brake Lines F&R
SVE Braided Clutch Line TR3650
Powerstop 4 Piston Caliper Upgrade(calipers, rotors + pads)
BMR Motor Mounts
Front Bumper Cover
Front Bumper Cover Hardware
Front Upper Grille
Front Lower Grille
Spectre Cold Air Intake(to replace broken C&L)
Seat Air Bag Delete Resistors(OEM Ford)
Watson Racing Interior Door Handle Mounting Kit
OMP Tow Straps
3" Speaker Port Tube(for brake ducts to pair with Full Tilt Boogie backing plates)
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,559
Location
Cheshire, CT
Nice track project, Kevin. I'll be following your build and race results.
 

kevinatfms

Ex-Ford/Kia/Hyundai Tech
Established Member
Premium Member
Joined
Jan 29, 2006
Messages
4,990
Location
Maryland
Photo of the engine from when I picked it up. Will remove the broken C&L intake for the Spectre intake kit. Removing the strut tower brace for an OE brace. And also removing the engine cover to sell.
IMG_3823.JPG



Sent from my iPhone using the svtperformance.com mobile app
 

kevinatfms

Ex-Ford/Kia/Hyundai Tech
Established Member
Premium Member
Joined
Jan 29, 2006
Messages
4,990
Location
Maryland
Cut up some 3" speaker ports and drilled them into an aftermarket OE type lower grille for some brake ducts. Ordered Full Tilt Boogie 3" backing plates and will run 3" high temp hose for the brakes.
IMG_3843.JPG

Will get the 275/40R18 NT05's today. Mount and balance tomorrow. Should have them installed on the car on Monday.

Anyone have a set of stock exhaust manifolds laying around they dont need? We need to switch the long tube headers back off to save VPI points.
 

kevinatfms

Ex-Ford/Kia/Hyundai Tech
Established Member
Premium Member
Joined
Jan 29, 2006
Messages
4,990
Location
Maryland
Does anyone have the original style(non-billet) Charge Motion Control Delete Plates from Ford Racing? To eliminate VPI points we can eliminate using the billet versions from Steeda.
 

kevinatfms

Ex-Ford/Kia/Hyundai Tech
Established Member
Premium Member
Joined
Jan 29, 2006
Messages
4,990
Location
Maryland
More parts delivered:
Spectre intake
Steeda Pro Action Struts/Shocks
Steeda Sport springs
GT500 strut mounts(using the bearing only)
Steeda Caster/Camber plates

Hope to get the suspension parts put together this weekend so that i can just swap them in next week.
 

Users who are viewing this thread



Top