2014 Roush stage 3 modded, JPC return style fuel system running on E85, Roush 110mm CAI, Kooks LT headers with off road H pipe, ID1000's, Steeda Heat Exchanger, BMR suspension ,Steeda Aluminum driveshaft, Mcleod RST clutch/lightweight steel flywheel w/SS clutch line, MGW race spec short shifter, VMP 67mm throttle body
Anyways, This is what is happening. I had a misfire issue on Dyno. Plugs and O2 sensors changed. Still had misfire. Coils changed, crankshaft sensor pulled and wiped off, crank relearn performed. Kam reset done. Cylinders scoped and compression test done. No damage shown and everything is within specs. Data logs still show misfire at WOT, but no CEL's present.
Anymore suggestion from anyone? Let me know if you want to see data logs. Thanks
Anyways, This is what is happening. I had a misfire issue on Dyno. Plugs and O2 sensors changed. Still had misfire. Coils changed, crankshaft sensor pulled and wiped off, crank relearn performed. Kam reset done. Cylinders scoped and compression test done. No damage shown and everything is within specs. Data logs still show misfire at WOT, but no CEL's present.
Anymore suggestion from anyone? Let me know if you want to see data logs. Thanks