Ive slowly been gathering parts for my build. I had a 2014 MT82 car that started as a Paxton car and ended as a On3 twin turbo car. Loved how that car ran. Install was a BEAR, but once it was done and the exhaust leaks fixed, it ran like a scalded ass ape. Sold that car and bought a 1 owner 2007 GT500 with ~6000 miles. Modded it to 643 whp and then sold that one too.
Bought this beauty in March and she just broke 3000 miles. It's a 301A 10r80 car and absolutely love it. She went 11.6@121 in 3500ft DA with only an e85 tune and cat deletes.
So.. .main components to this install:
--CX Racing TT kit for s550
--CX Racing 6765 dual BB, billet wheel T4 turbos with .81 hot sides
--Amazon 3gph bronze geared scavenge oil pump
--Tons of misc -4 (turbo feed), -8 (trans oil cooler line), and -10 (oil drain and return) hose and black fittings
--Performance Automatic part No PA68505 10r80 fittings for custom lines
--stainless 3" x pipe
--Sai Li return fuel system
--ID1050x injectors
--will likely be Lund tuned
I stumbled upon this TT kit by mistake after looking for a turbo solution for the s550 cars that didn't cost $10k all in (fuel, tuning, etc).
Twin Turbo Bottom Mount Header Downpipe Intercooler Kit For 2015+ Ford Mustang GT 5.0
Having gone the China route before on my 2014 and being able to fabricate my way through problem, I said why the hell not, let's give it a go. And for the price, wow.... kind of a no brainer.
Now... the kit is not complete and actually missing quite a bit to make it a bolt on affair. I still needed to buy turbos, all oil pluming (lines and scavenge pump) and fuel. I ended up buying two CXRacing 6765 sized dual BB, billet wheel turbos. The quality on them seems fine (they appear to be rebadged Magnum turbos) but jury is out on them so fingers crossed for now.
Intercooler is a 4" core, so im hopeful it will do the job nicely. I am also using 2 genuine Tial MVR wastegates that I had "just in case" from my past tt build on the 2014 car. CXR credited me $200 on the kit for keeping their wastegates so I thought that was great.
Couple pics of the kit as it came.
I didn't like the cold side raw aluminum so I had it all powder coated low gloss texture black.
Started tearing the old girl down tonight. These damn S550s are full of extra shit. Insulation, brackets, tons of electrical sensors for every damn thing. Ridiculous. Take a look at this weird electric actuated air damn thing just behind the front bumper cover.
The face only a mother could love LOL.
Got the IC hung tonight. Looking darn good.
Lots of small, side projects left to do other than the obvious parts of the install.
--remove factory trans cooler hard lines and install -8 lines re routed to driver's side
--measure, cut and assemble -4 lines for feed
--measure, cut and assemble -10 lines for oil dump from turbos and return to oil filler
--fabricate mounting bracket for scavenge pump
--relocate wastegates as the 10r80 is wider than the mt82 this kit was based around
Probably more but i'll document as I go.
Couple more misc pics.
More to come!
Bought this beauty in March and she just broke 3000 miles. It's a 301A 10r80 car and absolutely love it. She went 11.6@121 in 3500ft DA with only an e85 tune and cat deletes.
So.. .main components to this install:
--CX Racing TT kit for s550
--CX Racing 6765 dual BB, billet wheel T4 turbos with .81 hot sides
--Amazon 3gph bronze geared scavenge oil pump
--Tons of misc -4 (turbo feed), -8 (trans oil cooler line), and -10 (oil drain and return) hose and black fittings
--Performance Automatic part No PA68505 10r80 fittings for custom lines
--stainless 3" x pipe
--Sai Li return fuel system
--ID1050x injectors
--will likely be Lund tuned
I stumbled upon this TT kit by mistake after looking for a turbo solution for the s550 cars that didn't cost $10k all in (fuel, tuning, etc).
Twin Turbo Bottom Mount Header Downpipe Intercooler Kit For 2015+ Ford Mustang GT 5.0
Having gone the China route before on my 2014 and being able to fabricate my way through problem, I said why the hell not, let's give it a go. And for the price, wow.... kind of a no brainer.
Now... the kit is not complete and actually missing quite a bit to make it a bolt on affair. I still needed to buy turbos, all oil pluming (lines and scavenge pump) and fuel. I ended up buying two CXRacing 6765 sized dual BB, billet wheel turbos. The quality on them seems fine (they appear to be rebadged Magnum turbos) but jury is out on them so fingers crossed for now.
Intercooler is a 4" core, so im hopeful it will do the job nicely. I am also using 2 genuine Tial MVR wastegates that I had "just in case" from my past tt build on the 2014 car. CXR credited me $200 on the kit for keeping their wastegates so I thought that was great.
Couple pics of the kit as it came.
I didn't like the cold side raw aluminum so I had it all powder coated low gloss texture black.
Started tearing the old girl down tonight. These damn S550s are full of extra shit. Insulation, brackets, tons of electrical sensors for every damn thing. Ridiculous. Take a look at this weird electric actuated air damn thing just behind the front bumper cover.
The face only a mother could love LOL.
Got the IC hung tonight. Looking darn good.
Lots of small, side projects left to do other than the obvious parts of the install.
--remove factory trans cooler hard lines and install -8 lines re routed to driver's side
--measure, cut and assemble -4 lines for feed
--measure, cut and assemble -10 lines for oil dump from turbos and return to oil filler
--fabricate mounting bracket for scavenge pump
--relocate wastegates as the 10r80 is wider than the mt82 this kit was based around
Probably more but i'll document as I go.
Couple more misc pics.
More to come!