315 on a 18x10 rim

[boston george]

315 on a 18x10 rim-now need help finding a 305 HELP

just wondering if ill run into problems with exaust rubbing or inside/outside rub,can it be done?anyone dpne it before and what tires?i have a set of fr500 replicas thinking about 315s/30/18 in the rear and 265/35/18 frontsoke:

 

[blksvtCOBRA714]

depends on what type of tire you run first. I wouldn't recommend running a 315 on a 10" wide rim. I'm running a 315 toyo on a 10.5" wide. The widest I would go on a 10" is 295 unless its nitto than a 305 woudl suffice. Front your fine. Many people run 255 or 265 w/o issue. I ran a 275 bf goodrich on a 18x9 for awhile w/o issue.

 

[Mystichrome#365]

Mid wouldn't go bigger than a 305 on a 10 inch wheel

 

[boston george]

is nitto the only vendor that makes a 305? cant seem to find any 305 that isnt a drag radial ..any pros and cons on a front 265 over a 275?

 

[boston george]

now i need help finding a 305/30/18

 

[boston george]

or 305/35/18 what you guys think?

 

[707svt]

If you do Nitto555 DRs you will be fine just need some low pro IRS bolts.

 

[boston george]

thinking of buying a set of FALKEN AZENIS RT-615S 315/30/18 THREAD WIDTH 11.7 SHOULD I BE OK

 

[blksvtCOBRA714]

Like I said before I would stay away from 315's on a 10" wide rim. Your going to run into a lot of bulge. The reason i recommended the 305 in nitto was because nitto runs smaller than other companies like bf goodrich. Just my 2 cents. Search is your best option here.

 

[eddietermi]

I use a 305 on a 10'' rim, pirelli p zero, no bulge

 

[Blown_By_You]

Like I said before I would stay away from 315's on a 10" wide rim. Your going to run into a lot of bulge. The reason i recommended the 305 in nitto was because nitto runs smaller than other companies like bf goodrich. Just my 2 cents. Search is your best option here.

I will post sidewall pics of my 315 azenis when I get home. The sidewalls are flat. No bulge. Nothing. As a matter of fact, I wouldn't want to run anything smaller

 

[boston george]

thanks blown by you, by the way do also run the azenis rt-615 up front?

 

[707svt]

Like I said before I would stay away from 315's on a 10" wide rim. Your going to run into a lot of bulge. The reason i recommended the 305 in nitto was because nitto runs smaller than other companies like bf goodrich. Just my 2 cents. Search is your best option here.

This is y I said Nitto 315 there not as wide as others, when I had these they actually curved in instead of flush or buldge on a 10.5 so 315 in a Nitto will be good if he wants to take the 315 route but ya anything else id say 305.

 

[Blueline]

Here are my MT ET's 315/30/18 on a 10" Wheel, hope it helps.

 

[boston george]

 

[boston george]

wheels fit perfect no rubbing unless the car is jacked up and rear arm hangs it barley touches irs bolt,mite grind half of it off or add a 1/4 spacer or both but no rubbing at all inside or outside ,im on a eibach prokit with eibach swaybars..THANKS GUYS ALL YOUR HELP WAS APPRECIATED

 

[svtcobra440]

Toyo Proxes R888 at tiresdirect.net has the 315/35/18 for $290 ea. Not a bad looking tire. I'm leaning that way myself. I'm sure those will fill the wheel well nicely.

 

[svtcobra440]

Toyo Proxes R888 at tiresdirect.net has the 315/35/18 for $290 ea. Not a bad looking tire. I'm leaning that way myself. I'm sure those will fill the wheel well nicely.

 

[boston george]

Toyo Proxes R888 at tiresdirect.net has the 315/35/18 for $290 ea. Not a bad looking tire. I'm leaning that way myself. I'm sure those will fill the wheel well nicely.

yeah when i run these out id be willing to run a toyo r888 315/35/18..i was kinda scared at first with the tire size but the falkens azenis are ok..only 315/30/18 for 264..a 35 series would definatley fill the walls better...post pics of your install on here when your done thanks bud

 

[boston george]

tiresdirect.net has TOYO Proxes TQ P315 35R18 LL for 245.00
tiresdirect.net has TOYO Proxes R888 315 30ZR18 98Y 264.0