Mark and crew, I have the crossover delete and the braided line that you show in the attached picture. I like where the y-block is located and would like to know what upper radiator hose is shown in the picture. I'm looking at my stock upper hose and it doesn't look like it will position it in the same manner.
Do you guys offer a remote thermostat housing with a 1.75" inlet and 2" outlet with the hose barb fitting? I know you offer the remote tstat housing that will fit the upper hose, but I have a custom setup and want to install it on the lower hose which is 1.75" (I'm running the FRPP block adapter with the 2" inlet), so need to have a 1.75 to 2" Tstat adapter. if not, I'll go through IPSCO and have it made.