This Black on black pristine notch is in show condition. Show car/drag car. Asking 17k Car has ran 9.8's with 1.38 60ft. at 137mph.
1992 Mustang Notchback stroker
Body:
• 1992 Mustang V-8 coupe (Notchback)
• Complete repaint black clear coat
• Black interior
• Smoked 6 piece headlight kit
• Super clean engine bay with all hidden wiring
• Scott rod fabrication, engine bay panels satin black
• Cervinis 4” cowl non lift off hood / Painted and clear coat under side
• Ford racing hood pins
• All new custom door panels, door pins, bushings, and weather stripping
• All window moldings and mirrors painted
• Tinted windows
• Trunk paneled and carpeted
• Under carriage of car painted Krylon black
• Antenna hole and windshield wiper holes welded
• Front and rear bumpers removed for weight reduction
Interior:
• Custom THR basket style roll cage
• Corbeau lightweight racing bucket seats
• G force racing harness kit
• Custom rear seat delete kit
• New black carpet kit
• New black 5.0 floor mats
• New 5.0 door sills
• Moroso custom switch panel kit
• A/C removed for weight reduction
• Heater removed for weight reduction
• Fans and ductwork removed for weight reduction
• Autometer carbon fiber 5” monster tach
• Autometer shift light
• Autometer carbon fiber oil pressure
• Autometer carbon fiber fuel pressure
• Autometer carbon fiber water temp.
• Autometer pillar gauge mount
• Hurst shift knob
Engine:
• Pro built 347 stroker 12.25:1 compression
• AFR 185cc aluminum heads
• Pro Systems custom built 780 carb
• Probe forged dome top pistons
• Probe forged ultra light I-beam rods
• Probe forged 4340 crank
• Camshaft innovations custom solid roller cam (.731/.705 lift, 262/265 duration, 107 LC)
• Custom .750 lift solid roller springs
• Titanium spring cups
• Titanium spring retainers
• Titanium 10 degree locks
• Probe billet shaft rocker conversion (1.6 ratio)
• Chromoly pro hardened pushrods
• Comp cams pro link bar solid roller lifters
• All Felpro custom gaskets
• EDL Victor Jr. single plane intake
• Precision 28oz SFI balancer
• 28oz SFI flywheel
• CSR electric water pump
• March pro billet brackets
• March pro billet pulleys
• March pro billet tensioner kit
• FMS black motorsport valve covers
• Ford racing black air filter kit
• Milodon billet main cap conversion
• Milodon billet main support girdle
• ARP rod bolts
• ARP main bolts
• Probe billet girdle
• Block custom painted mystic in down draft booth
• Canton 7qrt race pan
• Canton custom pick up
• Canton dipstick
• 7800 rpm shift point
• Brad Penn motor oil
Chasis/Suspension:
• UPR chromoly K member
• UPR chromoly A arms
• UPR Billet coil over kit
• Lakewood 90/10 struts
• UPR billet caster camber plates
• UPR chomoly adj. upper control arms
• UPR chromoly adj. lower control arms
• UPR solid bushings
• UPR chromoly adj. anti-roll bar
• Strange 10 way adj. rear shocks
• Welded 8.8 Axle shafts
• Moser 31 spline spool
• Moser 31 spline axles
• Moser c-clip eliminators
• Moser 3” race studs
• Moser aluminum diff. cover
• Pro 5.0 4.56 gears
Brakes:
• Aerospace components billet drag disk brakes
• Aerospace components billet calipers
• Aerospace components manual conversion kit
• Aerospace components master cylinder
• Aerospace components custom stainless brake lines
• Hurst competition roll control (line lock)
Transmission:
• Liberty gears faceplated Tremec 5 speed
• Spec stage 3 clutch kit
• Spec SFI billet flywheel
• FMS aluminum drive shaft
• Quicktime SFI steel bellhousing
Exhaust:
• Kooks custom long tube headers 1 7/8 x 3” (powder coated)
• Kooks custom 3’ x pipe
• Kooks custom stainless quad race bullit mufflers 3”
• THR custom 3” turn downs
Fuel System:
• Aeromotive braided line fuel kit
• Aeromotive 600hp billet fuel pump
• Aeromotive billet fuel pressure regulator
• Aeromotive stainless braided fuel lines
• SFI aluminum race fuel cell (10 gallon) grounded out
• Pro systems custom 780 carb
Ignition:
• MSD 6al box
• MSD blaster coil
• Taylor spiro pro 10mm wires
• Autolite 3923 plugs
• MSD pro billet distributor
• All wiring redone to remove EFI connectors
• All wiring hidden behind dash and fenders
Wheels/Tires:
• Weld racing pro magnum forged fronts (15 x 3)
• Weld racing pro magnum forged rears (15 x 10-6 BS)
• Mickey Thompson sportsman front runners (26”)
• Mickey Thompson ET Drags rear (28 x 10.50 x 15)
Racing Parts:
• Flaming river manual rack kit
• Flaming river billet adj. steering shaft kit
• Off set rack bushings
• NHRA battery kill switch (rear)
• Custom rear mount battery kit
• Custom billet aluminum battery hold down
• Optima red dry cell racing battery
• Custom aluminum firewall plates
• Holley billet throttle bracket
• Lokar braided steel throttle cable
• Aerospace components billet evac system
• Aluminum 3” radiator
• Flex-a-lite dual electric fan
• Stainless steel upper/lower radiator hoses
• Billet aluminum radiator shield
1992 Mustang Notchback stroker
Body:
• 1992 Mustang V-8 coupe (Notchback)
• Complete repaint black clear coat
• Black interior
• Smoked 6 piece headlight kit
• Super clean engine bay with all hidden wiring
• Scott rod fabrication, engine bay panels satin black
• Cervinis 4” cowl non lift off hood / Painted and clear coat under side
• Ford racing hood pins
• All new custom door panels, door pins, bushings, and weather stripping
• All window moldings and mirrors painted
• Tinted windows
• Trunk paneled and carpeted
• Under carriage of car painted Krylon black
• Antenna hole and windshield wiper holes welded
• Front and rear bumpers removed for weight reduction
Interior:
• Custom THR basket style roll cage
• Corbeau lightweight racing bucket seats
• G force racing harness kit
• Custom rear seat delete kit
• New black carpet kit
• New black 5.0 floor mats
• New 5.0 door sills
• Moroso custom switch panel kit
• A/C removed for weight reduction
• Heater removed for weight reduction
• Fans and ductwork removed for weight reduction
• Autometer carbon fiber 5” monster tach
• Autometer shift light
• Autometer carbon fiber oil pressure
• Autometer carbon fiber fuel pressure
• Autometer carbon fiber water temp.
• Autometer pillar gauge mount
• Hurst shift knob
Engine:
• Pro built 347 stroker 12.25:1 compression
• AFR 185cc aluminum heads
• Pro Systems custom built 780 carb
• Probe forged dome top pistons
• Probe forged ultra light I-beam rods
• Probe forged 4340 crank
• Camshaft innovations custom solid roller cam (.731/.705 lift, 262/265 duration, 107 LC)
• Custom .750 lift solid roller springs
• Titanium spring cups
• Titanium spring retainers
• Titanium 10 degree locks
• Probe billet shaft rocker conversion (1.6 ratio)
• Chromoly pro hardened pushrods
• Comp cams pro link bar solid roller lifters
• All Felpro custom gaskets
• EDL Victor Jr. single plane intake
• Precision 28oz SFI balancer
• 28oz SFI flywheel
• CSR electric water pump
• March pro billet brackets
• March pro billet pulleys
• March pro billet tensioner kit
• FMS black motorsport valve covers
• Ford racing black air filter kit
• Milodon billet main cap conversion
• Milodon billet main support girdle
• ARP rod bolts
• ARP main bolts
• Probe billet girdle
• Block custom painted mystic in down draft booth
• Canton 7qrt race pan
• Canton custom pick up
• Canton dipstick
• 7800 rpm shift point
• Brad Penn motor oil
Chasis/Suspension:
• UPR chromoly K member
• UPR chromoly A arms
• UPR Billet coil over kit
• Lakewood 90/10 struts
• UPR billet caster camber plates
• UPR chomoly adj. upper control arms
• UPR chromoly adj. lower control arms
• UPR solid bushings
• UPR chromoly adj. anti-roll bar
• Strange 10 way adj. rear shocks
• Welded 8.8 Axle shafts
• Moser 31 spline spool
• Moser 31 spline axles
• Moser c-clip eliminators
• Moser 3” race studs
• Moser aluminum diff. cover
• Pro 5.0 4.56 gears
Brakes:
• Aerospace components billet drag disk brakes
• Aerospace components billet calipers
• Aerospace components manual conversion kit
• Aerospace components master cylinder
• Aerospace components custom stainless brake lines
• Hurst competition roll control (line lock)
Transmission:
• Liberty gears faceplated Tremec 5 speed
• Spec stage 3 clutch kit
• Spec SFI billet flywheel
• FMS aluminum drive shaft
• Quicktime SFI steel bellhousing
Exhaust:
• Kooks custom long tube headers 1 7/8 x 3” (powder coated)
• Kooks custom 3’ x pipe
• Kooks custom stainless quad race bullit mufflers 3”
• THR custom 3” turn downs
Fuel System:
• Aeromotive braided line fuel kit
• Aeromotive 600hp billet fuel pump
• Aeromotive billet fuel pressure regulator
• Aeromotive stainless braided fuel lines
• SFI aluminum race fuel cell (10 gallon) grounded out
• Pro systems custom 780 carb
Ignition:
• MSD 6al box
• MSD blaster coil
• Taylor spiro pro 10mm wires
• Autolite 3923 plugs
• MSD pro billet distributor
• All wiring redone to remove EFI connectors
• All wiring hidden behind dash and fenders
Wheels/Tires:
• Weld racing pro magnum forged fronts (15 x 3)
• Weld racing pro magnum forged rears (15 x 10-6 BS)
• Mickey Thompson sportsman front runners (26”)
• Mickey Thompson ET Drags rear (28 x 10.50 x 15)
Racing Parts:
• Flaming river manual rack kit
• Flaming river billet adj. steering shaft kit
• Off set rack bushings
• NHRA battery kill switch (rear)
• Custom rear mount battery kit
• Custom billet aluminum battery hold down
• Optima red dry cell racing battery
• Custom aluminum firewall plates
• Holley billet throttle bracket
• Lokar braided steel throttle cable
• Aerospace components billet evac system
• Aluminum 3” radiator
• Flex-a-lite dual electric fan
• Stainless steel upper/lower radiator hoses
• Billet aluminum radiator shield