A pillar pod mounting

[Corner-Carver]

Got my Nordskog digital guages and senders from summit yesterday (boost, oil pressure, and water temp) along with the Autometer 12123.

How did you guy mount the pod to the pillar. I really don't like the fact of having push pins to hold it up. I'd like something a little cleaner looking. Any ideas?:shrug:

 

[Sonic03inSC]

I used the push pins It does not look that bad at all.

 

[CobraBob]

I used the push-pins with mine. Looked very clean in my opinion. I don't know of any other cleaner way to do it.

 

[Corner-Carver]

Guess I'll give the pins a try. I figured I could use some 3M doublesided tape but that would make removal a BITCH.

 

[Flatliner]

I had the same issue not wanting to use the push pins, so I decided to use the 3M double sided tape... worked great, until it got really humid, then I came out to the car and my a pillar was hanging by the wires. I tried to clean off the pillars with alcohol and still had the same issues. Until I have time I used my leftover flex trim from my hood mod to hold it up until I complete it. I really do want to use the 3M tape so I will continue to try.