Okay , So I had a previous post about vibrations and sounds coming from the rear end. It has been decided that it needs a rebuild.
The car is mostly street driven. Dunno if i'd ever take it to the track for a pull or not (most likely not). So with that in mind I figured I would run it by you guys and see what you think/recommend. Oh and car mostly only has bolt ons atm maybe a 2.3 twin screw later on at some point but for now it's just the bolt ons.
So here is what we are looking to order.
Ford Performance 31 Spline T-Lok w/Carbon Discs
Ford Performance 3.55 Gears
Ford Performance Ring & Pinion Installation Kit - With Bearings
Ford Performance Half Shaft IRS Bearing & Seal Kit
Ford Performance IRS Cover
FT 1200 Front Diff bushings
FT 1300 Rear Diff bushings
I'm wondering if this FT 1401 Rear Diff iso is worth it with the milled ford racing cover ?
While these things are being taken care of. Besides the Fuel filter are there any other things I should be taking a good look at ?
Thanks in advance
John
The car is mostly street driven. Dunno if i'd ever take it to the track for a pull or not (most likely not). So with that in mind I figured I would run it by you guys and see what you think/recommend. Oh and car mostly only has bolt ons atm maybe a 2.3 twin screw later on at some point but for now it's just the bolt ons.
So here is what we are looking to order.
Ford Performance 31 Spline T-Lok w/Carbon Discs
Ford Performance 3.55 Gears
Ford Performance Ring & Pinion Installation Kit - With Bearings
Ford Performance Half Shaft IRS Bearing & Seal Kit
Ford Performance IRS Cover
FT 1200 Front Diff bushings
FT 1300 Rear Diff bushings
I'm wondering if this FT 1401 Rear Diff iso is worth it with the milled ford racing cover ?
While these things are being taken care of. Besides the Fuel filter are there any other things I should be taking a good look at ?
Thanks in advance
John
Last edited: