adding some power

[Hugo1]

the date is set march 19 ill be taking my car to the shop for a complete change
I thought ill share with you guys well here goes the list
-stage 6 port steig.
-2.93/4lb
-bf idlers
-kb BAP/wire upgrade
-mafia
-accufab tb/pl
-mgw short shifter
-all 4rotors with new hawk hps brakes
-McLeod cluth rxt/flywheel ect.
-rolled fenders/low profile bolts
-mm subframe connectors
-tune/dyno
-lethalperformance ic tank
-head cooling mod gen2
-sct handheld tuner
-60lb injectors
I think that's it,the car right now is pretty much stock it only has a
-magnaflow exhaust, X pipe(stock manifolds)
-afco heatexchanger
-bf IRS brace
-k&n intake
ill post numbers as soon as I get the car back thanks :rockon:

 

[jrichber]

Is your SC ported? 2.76 and 4lb lower little excessive for a non ported

 

[Hugo1]

no it's not ported

 

[KaotikGT]

I would add a port to that list, or forget the lower.

 

[svtrookie]

Is your SC ported? 2.76 and 4lb lower little excessive for a non ported

+1 I suggest you port the blower if your going to run the 4lb lower.

 

[Hugo1]

why is it not a good thing to add the 4lb??

 

[KaotikGT]

The eaton will build up to much heat without a port

 

[Hugo1]

would it be better if I do a port and a 2.93/4lb??

 

[Mr.Venom]

would it be better if I do a port and a 2.93/4lb??

You can still do a 2.76/4lb but what we're getting at is, its pretty necessary to have a port done or you'll just heak soak like its your job.

 

[svt4me38]

POSI testings showed on his ports that the 2.9/4lb lower was the best street combo and 2.9/6lb was the best track combo.
Doing a lower without a port will result in a loss of power due to the blower generating to much heat.

 

[Seabiscuit]

POSI testings showed on his ports that the 2.9/4lb lower was the best street combo and 2.9/6lb was the best track combo.
Doing a lower without a port will result in a loss of power due to the blower generating to much heat.

This ^

 

[Hugo1]

well change of plans called steig. and well ill be porting the eaton to a stage 6
thinking of doing 2.93/4lb what you guys think? ill be adding 60lb injectors

 

[b_dike]

well change of plans called steig. and well ill be porting the eaton to a stage 6
thinking of doing 2.93/4lb what you guys think? ill be adding 60lb injectors

In for numbers when your done... With a port you look good to go. I'd do the 2.93/ #4 COMBO, but that's just me. :beer:

 

[cj428mach]

If you did some of that work yourself you could go twin screw and make some real power.

 

[cobracide]

Port it and almost max your combo out with a SBTB (single blade throttle body/plenum) combo, Dragon. Push it further with a Killer Chiller and a 2.9x/6# combo.

 

[spray'n mach 1]

check out this guys numbers..pretty damn impressive

http://www.svtperformance.com/forum...794-stage-6-dyno-numbers.html?highlight=stage

 

[mysticvenom623]

Good luck!!!! Can't wait to see the dyno numbers!!!!

 

[Hugo1]

so just got the car back and it put down 510hp and 515tq
what you guys think?

 

[SilverCobra7]

so just got the car back and it put down 510hp and 515tq
what you guys think?

Solid numbers... How much boost did it make? Timing, A/F,etc.

 

[mrose75]

so just got the car back and it put down 510hp and 515tq
what you guys think?

Congrats? That's with a Stage 6 port?:beer: