AED data log help

[Chameleon76]

I'm sure Shaun in busy have not heard back. What PID's to choose? Sorry for the huge pic. Thanks

 

[CPRsm]

Check your emails for any attachments. He may have sent a config file you can load for what he wants to see. If not,...

Fuel trims, long and short for both banks.
Maf in frequency
Load as a fraction
Lambda reading for both banks as well as correction percentage.
That should get him close to what he wants

 

[Liln2o]

E mail is your best bet

 

[Vic2186]

Here you go!!


RPM
Spark
Spark V2
TP voltage
Maf Frequency
Load as a fraction
Long term fuel trims
Short term fuel trims
Lambse B1/B2
Measured air fuel

I want 2 logs:
1. Part throttle in 3rd from 1100 to 5K very slow acceleration followed immediately by a few minutes of idle.
2. WOT from 2K to redline in 3rd or 4th.

 

[turbosha]

heres what he wanted from me:
Using Live Link Gen 2 log the following:

RPM
Spark
Spark V2
Load as a fraction
TP Voltage
Maf Frequency
Long term fuel trims
Short term fuel trims
Lambse B1/B2
Measured Air fuel

I want 3 logs:
1. warm idle 2 minutes
2. part throttle in 3rd from 1100 to 5K very slow acceleration
3. WOT from 2K to redline in 3rd or 4th

 

[turbosha]

Here you go!!


RPM
Spark
Spark V2
TP voltage
Maf Frequency
Load as a fraction
Long term fuel trims
Short term fuel trims
Lambse B1/B2
Measured air fuel

I want 2 logs:
1. Part throttle in 3rd from 1100 to 5K very slow acceleration followed immediately by a few minutes of idle.
2. WOT from 2K to redline in 3rd or 4th.

you beat me to it.:burnout:

 

[burke985]

I can Emaiil you the Config file i have saved if you want just PM me your email addy , just load it up and log away

 

[Snake40]

Exact same pids he wanted with me.
I never figured out how to save the config file. I had to check the pids separately every time I logged.
Mike

 

[Mr. Anderson]

FYI, the slow acceleration for 1,100 to 5,000 rpm should take 20-30 seconds

 

[cuslo1]

Also redline in third gear is about 130mph at least it was for me A6 3.15 gears lol

 

[Snake40]

Also redline in third gear is about 130mph at least it was for me A6 3.15 gears lol

Me too. I remember that well. It'll all be worth it in the end. Have someone help you with the laptop and be safe

 

[Chameleon76]

All set. Thanks guys.

 

[mtrsprt]

FYI, the slow acceleration for 1,100 to 5,000 rpm should take 20-30 seconds

Yet feels like ETERNITY.......:uh oh:

 

[11GT50]

Also redline in third gear is about 130mph at least it was for me A6 3.15 gears lol

Yeah, that was not fun. :nonono:

Save it as a config file so you won't have to reselect the PIDs every time you log.

 

[Chameleon76]

Yeah the slow 1 to 5k did take forever. I messed up the logs a few times but it was just me and switching back to the laptop. Felt like the unibomber out there. :bash:

 

[five.slow]

Only good part of living out in the middle of the desert... We got endless strait roads out here.

To save the configure file all you have to do is check all the pids, click the verify or what ever button that brings up the actual log then click save configuration.

To load the configuration when you get to the pids selection screen select load configuration and click merge. Done

 

[burke985]

Yeah the slow 1 to 5k did take forever. I messed up the logs a few times but it was just me and switching back to the laptop. Felt like the unibomber out there. :bash:

data logging is always fun

 

[rotarymagic]

How do you data log an A6 car from 2k-7k rpms in only 3rd gear? I have a 13 so do I just do S-Mode and put it in 3rd then hammer it and throw it in drive or what? Can I just do a 1-3 pull from a stop instead (I have DRs)?

EDIT: Pardon the resurrection, but I DID use the search feature lol.

 

[Vert]

How do you data log an A6 car from 2k-7k rpms in only 3rd gear? I have a 13 so do I just do S-Mode and put it in 3rd then hammer it and throw it in drive or what? Can I just do a 1-3 pull from a stop instead (I have DRs)?

EDIT: Pardon the resurrection, but I DID use the search feature lol.

Use the sport/tap shift to put it in 3rd and go to town.

 

[rotarymagic]

Do I shift into drive after hammering it or just keep it in 3rd till I hit 7k?