All differences between Mach 1 motor and 03/04 Cobra motor

[svtcharged]

Can anyone tell me the differences between Mach 1 motors and 03/04 Cobra motors besides aluminum and iron blocks? Heads, cams, pistons, rods, cranks,? Thinking of doing a poor mans Cobra! Had one, sold it, regret it, now need another! If anyone knows also differences between Lincoln markviii motors too. All input will be greatly appreciated!

 

[AntiHeightPunk]

the four main differences are
1. Use
2. The
3. Search
4. Function

 

[C.Hicks26]

Pistons and rods in the cobra are forged. The cranks are the same. The heads and cams are the same. In my opinion instead of using the low compression of the cobra i would use the 10.0:1 compression of the mach 1 pistons whichever dish they are and get a forged set. You wont have to run as high boost to make big power as the cobra.

 

[na svt]

cams are the same
Pistons: mach has cast pistons, cobra forged
compression: mach 10:1, cobra 8.5:1
Crank: manual trans Mach, forged; cast in the auto trans Machs; Cobras are forged
Rods: cast in the Mach, forged in the Cobra.
Heads: same