All power is present and accounted for!

[i8u]

My dyno run! Sorry it's sideways!:??:

 

[Undy]

where????

*repaired by moderator

 

[i8u]

This should work?

 

[Undy]

no soap...

 

[i8u]

WTF- Since I can't post it right now I'll let you know how it went. Mr. moderator whats the problem?

Max power= 368.6 @ approximately 6400rpm
Max torque= 349.6 @ approximately 4200rpm

I'm a happy camper!

Who can calculate what my flywheel levels are?:beer:

 

[Undy]

somewhere between 433 and 460, depending where between 15% and 20% drivetrain loss we place..

 

[mosconiac]

Here ya are...

Max power = 368.6rwhp = 434fwhp @ approximately 6400rpm
Max torque= 349.6rwtq = 412fwtq @ approximately 4200rpm

If that is totally stock, throw away the silencer, put your K&N on and you'll see 380rwhp!

Mosconiac

 

[i8u]

Yes...bone stock. Can't wait to show my die hard LS1 buddy.Hehehe.:beer: He's going to poop his pants!

 

[08snake]

I can't believe I dyno'd 30rwhp less when I was stock.

 

[i8u]

Originally posted by 03snake
I can't believe I dyno'd 30rwhp less when I was stock.

If it makes you feel better.. Imeadately after the first I took a second run and got 355.7 rwhp. Heat soak must defenately be a huge factor.

 

[Blue03Cobra]

Originally posted by i8u
Mr. moderator whats the problem?

The easiest way is to host them on a website and use the IMG button in the reply box.

You can also upload them from your local hard disk using the "Attach File" box at the bottom of the reply window. Make sure that File and Print Sharing (in Network Neighborhood) is "on"...

 

[i8u]

One last try... If this doesn't work...Can someone host them for me?

 

[HAVEIGHT 13R]

Congratulations on the bone stock #'s you should be proud of those #'s. I only dynoed 357/356 stock. But hey now I am far from stock. Do what you want with the car and enjoy but make sure it's what you want to do with the car, after all it is yours.

 

[i8u]

Thanks,

Can you host a graph for me? I'm not computer literate.:??:

 

[slvrsnake]

Congrats on the numbers. Those are some good numbers for bone stock. :thumbsup:

 

[Blue03Cobra]

Originally posted by i8u
Thanks,

Can you host a graph for me? I'm not computer literate.:??:

Sure, e-mail it to me.

 

[i8u]

Can you PM me with your email address? Then I can send it as an attachment.

 

[Blue03Cobra]

I put it in your original post...:-D

 

[f4sfed]

Here's mine! Even though I was only expecting about 340rwhp, I still feel disappointed.

Check out the A/F ratio! I think if the thing could have measured richer than 10:1, it WOULD have!

BTW, this is BONE A$$ STOCK...silencer still in place.

What's the drivetrain loss? 15%? If so, that comes to a touch over 400hp!!

P.S. She's starting to feel slow.

 

[f4sfed]

Second pull...